radoi4o

OK guys...I realy need Help...today i got my Brand New SI Cage...
i have a qustuions fir the Mounting...?

can someone tell me Wath Hardware(Bolt and ****) i need to mount it real Solid...? for the Front one(that in the Frame) i have a idea(No Problem)... but that in the rear side(Subframe and Motor)there is my problem...?
i dont have no idea how can i get it safty and solid..?

P.S.
I used a Search Button - but Find Nothing..!!!
excuse me for my Bad English
every suggestion is Wellcome...Please..

apfire26

You simply need to tighten the two nuts at the end of each side of the threaded rod.
I'm not sure from your post what exactly your problem is.

radoi4o

the Cage come with NO Hardware...! Nothing just cage and Sliders...
and now Im wondering wath kind of Bolts I need to mount it...? Size's
..?

I Can't Use the old(Stock) bolts and stuff for shure I have to change it with Longer bolts...on the Pic in my
previous post i market the place that I have NO idea wath to Do..??

apfire26

O I see. Well you could call Sick and ask them. If I were at home I could tell you the sizes that come with an 07 zx6 cage, but they may be different on a 929 anyway. Sorry I can't help out more.

apfire26

I know its a threaded rod and two nuts. Just make sure the nuts you use are small enough to get a wratchet around them once they're in the tubing of the cage.

radoi4o

thanks anyway...

p.s.
did your Cage came with Hardware ..?

Beto

if you bought it directly from SI then yes, it should have came with all the hardware.

radoi4o

i bought it from HAI BikeShop...Im fucked Up for Shure..!

2 monts in waithig for nothing....Deamn..!

apfire26

Oh yeah, it definatly came with hardware. Just give em a call, they should have no problem sending the hardware to ya if you bought it from them. And even if you didn't get from them, call and just order hardware.


Just saw you got it from hai, just call them and let them do your dirty work. lol

Beto

that sucks, it should have came with the hardware, I buy all my SI stuff through HAI....I just noticed your overseas too. The easy way out would be for you to take off your old motor mounts, take them to a industrial supplier/shop and tell them you need longer bolts. and you can get whatever size threaded rod for the back, as long as it fits nice and snug through the rear cage holes.

Beto

oh yeah and when you get the front motor mounts bolts, be sure to get the ones that have the hex heads. Oh and one more thing, try to get a lock nut for the front bottom mount, helps out alot. GOOD LUCK

radoi4o

thanks... I knew that..! my only way is to do it by mySelf...

thanks guy's ... i just wanted to be shure that Im fucked...