does anyone know where i can find a tool to pull the flywheel of my 929

 

should have 2 threaded holes to run bolts through it to press it off

 

Looks like you need a threaded puller....Its a simple bolt with the correct thread to thread into the end of the rotor. You hold the rotor with a wrench using the 2 flat spots on the rotor then turn the threaded puller in untill it touches the end of the shaft, then turn it slowly till it pops the rotor off the crankshaft...Motion Pro makes them and any bike shop should be able to order it for you, or you can find or make a strong bolt that has the right threads and use that....

http://www.motionpro.com/motorcycle/partno/08-0086/

 

And look at that Motion Pro is nice enough to list the thread size and pitch so you can easly make or find your own.....All you need to do is make or find a M20 X 1.5 thread pitch Right hand threaded bolt

 

thanks for all your help