636 is going for paint...need help on how to take off tank.
#5
Re: 636 is going for paint...need help on how to take off tank.
Originally Posted by Christian P
O.K.
Tools and a hammer....
I am on it.
Tools and a hammer....
I am on it.
#6
Re: 636 is going for paint...need help on how to take off tank.
4 bolts.
One in the front 2 on the sides, then the one under the seat.
unhook the fuel line and the plug from the harness. You won't spill much fuel.
One in the front 2 on the sides, then the one under the seat.
unhook the fuel line and the plug from the harness. You won't spill much fuel.
#8
Re: 636 is going for paint...need help on how to take off tank.
Originally Posted by revditup
4 bolts.
One in the front 2 on the sides, then the one under the seat.
unhook the fuel line and the plug from the harness. You won't spill much fuel.
One in the front 2 on the sides, then the one under the seat.
unhook the fuel line and the plug from the harness. You won't spill much fuel.
Thank you sir.
#9
Re: 636 is going for paint...need help on how to take off tank.
No problem just got through taken mine off again yesterday. I've never drained mine though it may be time consuming because of the pump.
#11
Re: 636 is going for paint...need help on how to take off tank.
unplug ur fuel pump harness and let the bike run for a bit, then when u take the hose off no fuel will come out
#12
Re: 636 is going for paint...need help on how to take off tank.
Grab some Vice Grips... unbolt the top two bolts and then loosen the back bolts. Tip up the tank and clamp the lines with a set of vice grips. Once they are clamped, unbolt everything.. take it wherever and drain it.
Bam, done!
Bam, done!
#13
Re: 636 is going for paint...need help on how to take off tank.
i can take my tank off in under 1 minute........no bs
Thread
Thread Starter
Forum
Replies
Last Post