hey Guys, does anyone have the plans to make a 12 Bar for a 2000 Gix 750, or clear Pictures of one so that I can use it to make one, thanks if you can send it to TrickedGixx@aol.com

Chris

 

We just built mine but I don't have any good pics. We used 2 inch by 1/4 inch on the sides and 1/4 by 3 on the back. Just run the sides all the way up and put 3 bolts in each side. Then heat it up with a torch and bend them out evenly till you get the width you want. Then weld your scrape part on. that should be plenty sturdy because I can twist my subframe around with the bar. I haven't scraped yet. I'm about 10 inches from hittin the bar. I cant get past the mental part of it.