900rr is "burping"......

Thread Tools
 
Search this Thread
 
Old Jun 12, 2005 | 08:23 PM
  #1  
threekidss's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 873
From: bear delawhere?
threekidss is an unknown quantity at this point
900rr is "burping"......

heya, gota 96 900rr lately... last 2 weekends its been burping or acting like its not gettting any gas when I do a longer stoppie or just as I dump the clutch for a wheelie..... it has also cut off when I am coming to a hard stop on the road...... after the clutch it usually backfires...... any one got places to start looking...... have not cleaned or symced the carbs this year as of yet but it ran fine for the last 2 months......oh it does it less when the idle is up over 2k
mark
Old Jun 13, 2005 | 01:33 AM
  #2  
DoodleF4i's Avatar
...
 
Joined: Oct 2003
Posts: 4,730
From: ......
DoodleF4i can only hope to improve
Re: 900rr is "burping"......

sounds like it could be running rich?
Old Jun 14, 2005 | 06:22 PM
  #3  
threekidss's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 873
From: bear delawhere?
threekidss is an unknown quantity at this point
Re: 900rr is "burping"......

Originally Posted by DoodleF4i
sounds like it could be running rich?
maybey..... I changed back to stock can from dnd without resyncing..... did not rejett for the dnd ....... ran for 6 months fine.....i'll pull the plugs and do the carbs.....
mark
Old Jun 14, 2005 | 06:44 PM
  #4  
zrex's Avatar
Registered User
 
Joined: Feb 2005
Posts: 86
From: SUNNY WARM BIKE RIDING phoenix!
zrex is an unknown quantity at this point
Re: 900rr is "burping"......

actually if anything i would say its LEAN, check the float height in the carbs and make sure they are all the same , wheelies/stoppies w/ hard landings can change the float height from the pounding.
Old Jun 15, 2005 | 07:43 PM
  #5  
threekidss's Avatar
Thread Starter
Registered User
 
Joined: Feb 2004
Posts: 873
From: bear delawhere?
threekidss is an unknown quantity at this point
Re: 900rr is "burping"......

Originally Posted by zrex
actually if anything i would say its LEAN, check the float height in the carbs and make sure they are all the same , wheelies/stoppies w/ hard landings can change the float height from the pounding.
now there is something I have not thought of.......THANKS!!!!!!
mark
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bikebiz
Scooters
0
Nov 4, 2014 12:49 PM
painedogg25
Bike Parts Wanted
0
Mar 26, 2014 04:28 PM
painedogg25
Bikes Wanted
2
Nov 26, 2012 12:12 PM
Chach
Reckless Methods
19
Oct 4, 2002 10:11 AM




All times are GMT -4. The time now is 09:37 PM.