I am going to try `12's tonight... do i need to bypass my tip sensor or can i just go ahead and try them??? i just dont wanna try and do em kill the bike and have it slam down Hard as hell...

 

the bike will stop after a second or 2 on the bar, but if you're trying for the first time tonight the bike will spend more time on it's side than anything else. pull in the clutch man.

 

my friend josh was trying slows/12's on his and was slaming down nasty hard..id fix it before you try behind BP ****.

 

It wont affect the bike in a 12

 

So i don't have to bypass it??? i just don't wanna fly over then front end...LOL

 

yeah it will

 

It most definatly DOES.

 

so how do i get the wire to stay looped then??? LOL

 

u wont slam down i leanred on my f4i without it bypassd and u can ride idle all day and when u scrape on idle ur going like 5 so if it stalls the bar comes off teh ground like 3 inches then drops back onto the bar. ull be fine fix it later

 

Well it can't hurt to try... guess i'll ley you guys know how it goes tonight

 

20 bucks says if he 12's he gonna slam that **** down hard

 

i dont see why you can throw a Radio Shack resistor in there and ride or if its the sensor with a magnet in it just put some silacone in it

 

ok wait i gots a good question where the **** is the sensor?? because i thought it was just under the fuel tank and those are the wires going to the fuel pump i belive so where do i find the tip sensor?

 

Look at where the tank screws in by the riders seat. The tip sensor is mounted to that bracket underneath. Unplug it. Cut the wiring. Connect the 2 outer wires. Block off the middle wire. Go do wheelie. Have fun because it is.