i have a cbr 900 98 i want to try the hand brake and mx bars how do i set it up i know under the cluth,but what do i need to buy.

 

you need a master cylinder with a remote resovoir or a clutch master cylinder, 80 inches of steel braided line and another caliper and bracket, you have to weld the two brackets together so they fit. or you can buy the adapter from moto-heaven.com and just run a single caliper

 

thanks for the info if you think of anything else hit me up.

 

what bracket do i need i was looking for it but cant find it.

 

u need another bracket and caliper for w/e bike u r putting the hb on. u take the original bracket and the new one, cut the holes that fit over the axle in half, and weld them back together.the u run the brake line from the handlebar to the new caliper

 

can you still have your foot brake available for use also while having a hand brake????

 

this way you can have hand and foot brake i got you thanfs

 

If you run dual calipers. If you just have a gp tech fitting when you hit your hb the foot brake will lock up where you cant push it at all untill you release the hb lever...

 

or you could go witht he www.fullthrottleinc.net setup and be done with it in 10 minutes...can use the foot and hand brake no problem, no pumping, no fading...less drag than 2 calipers.

tell bill that i sencha and he will hook it up....