Fuel injection wont come on.The fuel injection light on gauges isnt lit and no fuel is being injected when you turn on key.Fuses are fine and yes engine start switch is turned on.

 

so the pumps not priming the system when you first turn it on... i'd say the pump if gone. But you might want to check the fuel pump relay first.

 

Would that makethe light on the gauge not work

 

check your ground to

 

Check tip over sensor, I believe this stops fuel flow.
Check loose wires at ECU connector. I had this problem recently...
But if its not priming then get a manual and check the fuel system.
Did you do anything recently to the bike???

 

I just noticed your thread on Headlights. If you removed the headlight assembly then you need to put back the tip over sensor. Its a black box above your lights. If you did put it back make sure its not upside down.

 

Thats it probably let ya know in a few...

 

Yup that was it I even plugged that back in earlier but not tight enough I guess.That sux I have to run all those wires on the bike without the upper.Thanks

 

yup i got the same deal

 

GLad to hear that was it...
:YEAH

 

u dont have to keep all those wires....cut them and splice them before the big connector..

then you can stuff whats left in between the frame and motor