Noticed some threads still arising about this oil pickup mod for the f4i's so i figured id snap some pictures when i did mine for you new guys.

Step 1: take off headers, radiator(optional)

Step 2: Drain oil

Step 3: remove oil pan (might have to tap around the sides to get it to pull off after removing bolts)


Step 4: you will see the oil sucker (the big funnel looking thing in the middle)
-pull it out, there is a rubber bushing that goes with it


Step 5: Remove the rubber. Place your stuntex washer key on the top of the sucker


Step 6: You will see where the original sucker goes there is a keyway where the piece sticks in, since you are flipping the sucker around the stuntex washer key will be replacing this.

You will bend up the stuntex thing so it sits in the keyway


Make sure that it sits in the keyway


Step 7:The stuntex metal gasket will sit in between the rubber and the stuntex washer/key. There are little marks in the metal that the teeth sit in.



Step 8: put some gasket sealer on either side of the stuntex metal gasket(not alot) and put it all together


bolt your oil pan back up and your all good to go make wheelies

 

Great write up! Doing this tonight.

 

thanks made it reAL easy oh and i think u should put gasket on oil pickup before pushing metal tab onto oil pick up thanks

 

you mean in the middle??

you only need gasket around the outside to seal the oil pan... as shown in pic

 

Hey my boy ryan still has a couple oil pickups in his garage if anyone needs any

PM ME might beable to get them

 

Do you guys know what metal the gasket is made of? Alluminium? and whats the thickness ? 1mm maybe ?