Can I do this?
Re: Can I do this?
For the front fairing you will need:
Front Fairing
Headlight
Fairing Stay
Windscreen
F4i Intake Tubes
For the Rear:
Rear Fairing
Rear Subframe
Both Seats
Rear pegs if you want them
Maybe More i'm not positive
To do the engine:
F4i Engine
F4i tank (different fuel pump or something)
Maybe the airbox, im not sure and maybe other **** too
Also i am sure i'm missing **** so if you search itll work as i have a bunch of topics about do the same things on here...Good luck
But basically if you want your f4 to be a f4i, you need to spend a shitload of money, and by the time you spent all that money you could have sold that f4 on ebay, and just bought a nice f4i...and you wouldnt have to worry about the work
Front Fairing
Headlight
Fairing Stay
Windscreen
F4i Intake Tubes
For the Rear:
Rear Fairing
Rear Subframe
Both Seats
Rear pegs if you want them
Maybe More i'm not positive
To do the engine:
F4i Engine
F4i tank (different fuel pump or something)
Maybe the airbox, im not sure and maybe other **** too
Also i am sure i'm missing **** so if you search itll work as i have a bunch of topics about do the same things on here...Good luck
But basically if you want your f4 to be a f4i, you need to spend a shitload of money, and by the time you spent all that money you could have sold that f4 on ebay, and just bought a nice f4i...and you wouldnt have to worry about the work
Re: Can I do this?
The F4i is fuel injection.
the air box is diffrent.
Re: Can I do this?
trickshow, I have some lightly rashed yellow f4i plastics all cut out for a SI cage. two sides, tail and the front fairing, even the stay, pm me if interested
Last edited by kipROCKet; Dec 30, 2007 at 03:21 PM.
Re: Can I do this?
you would need airbox and injectors as well.
and little things like the seat catch, both seats, airtube covers as well as tubes,
youd need a serious amount of bits to do this.. it would be easier and probably cheaper to sell yours and get an f4i.......
and little things like the seat catch, both seats, airtube covers as well as tubes,
youd need a serious amount of bits to do this.. it would be easier and probably cheaper to sell yours and get an f4i.......
Re: Can I do this?
I think we all scared him
Re: Can I do this?
But Trickshow, do you have any problems stunting your f4, is there anything i need to really look towards getting other than the standard stunt gear, so the bike doesn't get really hurt? Not trying to steal your thread btw
Re: Can I do this?
Yea i'm always on ebay looking at bike ****...even though im poor and can't buy it
But Trickshow, do you have any problems stunting your f4, is there anything i need to really look towards getting other than the standard stunt gear, so the bike doesn't get really hurt? Not trying to steal your thread btw
But Trickshow, do you have any problems stunting your f4, is there anything i need to really look towards getting other than the standard stunt gear, so the bike doesn't get really hurt? Not trying to steal your thread btw
Re: Can I do this?
i did the F4 into F4i tail conversion this past summer and besides the fairing, subframe, seats, and pegs you'll also need the taillight and battery tray(the taillight mounts on the tray not the fairing like on the F4) and thats it it all mounts right up. make sure you buy a plastic fairing though dont make the mistake i made and buy a aftermarket fiberglass piece cuz its a pain in the *** to put on and take off the bike. i did the conversion for looks(banana seat is disgusting i think) but also its more comfortable when you wheelie cuz you dont feel like your sliding off the seat.





