Lotus

is kicking my ***.

-1+10 in 2nd gear, I'm about 1 inch from the stock tail. **** is one of the hardest things I've ever done. Cant wait till I get it

Seal Clubber

learn long coasters until you can stop first and you will be able to do them very easily whenever you want

Lotus

I guess my question is how many of you guys learned with a bar or the stock tail. I've heard good things about both.

Seal Clubber

it doesn't really matter what you learn on just take it slow, dont just throttle it all the way back and **** yourself up, use the clutch and ease onto the tail with the brake controling you ........ learn coasters

tallyturbo

i learned by clutching it up at about 2 mph and catching it with the brake. once i was high engough just slowly played with the brake and throttle until i could gently set it on the bar. i learned the first day i tried. it helped me alittle bit to turn up the idel so when i got it that high i just let off the brake and the idel pulled me back to the bar.

Wheeliest

no bar, top of first gear, gas her back, hold elevation with engine braking whileriding the rear brake reallly lightly http://media.putfile.com/jstunt2 < ---

LOWS10

i learnt by getting it to balance point going slow, waited until it was perfectly certered from left to right and lightly blip the throttle to tap the bar. Just to get comfortable. Now i use the clutch and can tap at will. I also used the throttle at first instead of clutch because i really beefed up my 12 bar/ subframe so i wasn't afraid of braking ****.

Seal Clubber

these guys also had 10 o clock bars to learn on weeeak!!!! learn the right way not the gay way

Lotus

good video, my **** looks a lot like the guy with the gsxr in that vid. I gotta get a little lighter on the brake, looks like your barely using it.

Wheeliest

this is what happens when u get a bar after u scrape tail

http://media.putfile.com/12v-bar-on-02-R6

tallyturbo

call it gay if u want. i have only been stunting for 2 weeks tops and i can scrape my bar. i was just throwing in my

Lotus

I have a 905, but havent put it on till I can touch.

tallyturbo

if u already have it u might as well throw it on. just make sure when u think ur about to put it on the bar ur bike isnt leaning.

Lotus

The most surprising thing is when you go back, you think, this is definately gonna touch, I kept going, going, ........just crazy how far you have to go. I'll get it soon.

Wheeliest

don't beafraid to float it back before rev limiter... thats how i hit it first.

*Tanus*

use 1st gear, just bring it back till it hits

defiant_600

i scraped for the first time on my friends F4i the other day! i didnt even plan on riding but i got on there from a dead stop popped it up, was a little bit in front of balance point and was pissed i wasnt getting it so i blipped the throttle and rode the brake, and i heard it go to idle, and i was like hell yeah:YEAH .. then i leaned back and next thing i know i heard SCRRRRRRRRRRRRR!!!! i was like no ******* way... and paniced cause it wasnt my bike and i didnt want to drop the bike...lol! so i just ran with it and sat it back down... probally dosent help anyone but just wanted to tell my story...

Lotus

exactly what I'm doing

Wheeliest

after u doit sit down, its alot easier foot on seat. then u gotta learn how to scrape 5 times in 100 or so feet.

weirdsteve

once you get it locked and more advanced you won't give a ****. i remember and miss the days when i used to park a bike on a bar and dance around it cuz i was so happy.