i have a 02 f4i i put the clutch wire together and the kickstand wires too.
i still cant start it in any gear i can only start it in NU.

my ? is what wires do i put together on the wire harness????
can u show me a pic too???

thank you

 

what did you do to the bike before this issue?

 

Statred it in Neu. but when i stall out i would like to just start it in 1st.

 

i meant did you work on it, or replace a part?

 

There's a small green wire that comes outta the block next to the front sprocket. That wire needs to be ground out.

 

You should be able to see it fairly easy, it comes out just infront of the sprocket cover.

 

just cut all the wires that comin from the cdi and thats all.......

 

down the clutch level is a swith you need to put the two cables toggeter and the one in the kickstand the green one just grund it

 

i did all that and still wont do what i need it to do

 

then try a friends ignition

 

for what

 

see if your resistor is toasted in your ignition

 

it starts i can get it to start in 1st gears

 

ok so its all fixed

 

no it still will not start out side of neutral, if i stall out i cant start it up in first

 

thats because you bypassed a switch wrong....

 

i did the clucth and the kickstand. it will stay running with the kickstand down and in firstgear. but will not start in first. i dont know

 

its the clutch switch, it will start in first if it thinks the clutch is pulled in...

 

did this not work? that and the kick stand are the only think that will make it not start in gear to my knowledge

 

i did the clutch wires. i cant see the other wires down by the kickstand.