Rob Mega

OK ALOT OF U MIGHT THINK THIS IS FUCKED UP AND WELL IT IS BUT IT REALLY DID WORK A BUDDIE OF MINE HAS A CHEAP *** 9MM CARBINE RIFLE ONE DAY THIS DUMB **** MADE A SILENCER OUT OF PVC PIPE WASHERS AND DUCK TAPE HE TOOK A BUNCH OF WASHERS AND PACKED THEM INTO THE PEACE OF PVC THEY WERE JUST AN *** HAIR BIGGER THEN THE SHELL THEN DUCK TAPED IT TO THE BARREL ON THE END OF THE PVC HE SUPER GLUED A CAP WITH A HOLE THE SAME SIZE AS THE HOLES IN THE WASHERS KNOW WHEN HE WAS READY TO SHOT THIS THING I GOT THE HELL AWAY WAY FAR AWAY AFTER I KEPT TELLING HIM IT WAS A VERY BAD IDEA BUT THE **** REALLY WORKED NO LIE KNOW I'M NOT POSTING THIS TO TELL YOU TO TRY AND MAKE THIS **** CAUSE EVEN THOUGH IT WORKED I STILL SAY IT IS A VERY VERY BAD IDEA I'M POSTING THIS TO SHOW YOU HOW STUPID SOME PEOPLE CAN BE EVEN THOUGH IS IS MY FREIND THIS COULD OF ENDED VERY BADLY

ct954

stick a potato on the end of the barrel..LOL

og ryan lee

empty 2 liter bottle with rags stuffed inside.

DBOUNCE1

huh sounds like a very dangerous idea

GundamnitPete

sliencher just gives the expanding gases a place to expand before completely exiting the barrel.

if you want it REAL quiet, sub-sonic rounds will be what you'll need.

BeerSlave

there are books out there on how to make em, everything you need can be found at your local store...

DBOUNCE1

those really aren't all that quiet but still better

crtchrktrcr

why not 2 pieces of steel, w holes drilled n packing?

DBOUNCE1

don't you don't want it drilled unless you are talking about the inner sleeve then yes...and i would thred it for the barrel sure as hell wouldn't tape it like the first guy was sayin i'd want it Perfectly straight

BeerSlave

http://www.righthook.com/silence.html

skidmark

Works better with baffling between the washers. 8 washers or so per 10 inch silencer works nice, preferably with a ported barrel if you can machine one. Steel wool or fire-proof home insulation works very well between the washers, and you only need to re-pack after 50 to 100 shots or so cuz it packs down.
For a rifle drill a 1/2 inch down the barrel and tap in a threaded pipe fitting, then use a long nut on the silencer, with a threaded fitting and a nut on the other end of the cap so you can easily thread it on and off, cuz if you're semi auto (or full) then you could blow the silencer off if it's not attatched properly
...... from what I've heard