I f'ed my stock clutch up pulling a friend's 4x4 out of the mud one day, it wouldn't grab completely and all i had was the first very little bit of the lever as far as clutch pull goes. i went and got a new Barnett dirt digger clutch, and put it in. with the cover still off but the pressure plate on and the springs tightened down, the lever has no feel at all. it moves the rod in the clutch a little bit, but isn't able to disengage the clutch. anyone know what the hell i'm doing wrong??

 

nope sorry

 

+1 i have ynow idea, but i do know they had a recall on some of the clutch covers on tha z's maybe that might effect you...

 

i think i know what the prob is.


















































u fucked your **** up.... better fix it before summer!

 

hell yeah... 5 posts on that hiccup!

 

do you have everything installed correctly?? and is that cluctch made for the 03&04 or the 05&06... cuz they are different...
good luck...

 

ossibly #17 is not in there???

 

well get that **** there

 

I think you have to have the cover on to get proper tension.... doesn't part of the mechanism touch the clutch cover (in the center somewhere ?) I know on some dirtbike clutches that I've done....this was the case. good luck

 

that'd prolly do it....

i'd put the stock one back in, it still works run it till all the plates break...:YEAH
i love pinning the gas on a worn out clutch, and when it hits yanking the tires UP!!!:YEAH

 

check the pushrod for straightness or there might be a problem with the cam deal that actuates the pushrod (part #18)

 

Props to Barry with the schematics....