New shiot!

Thread Tools
 
Search this Thread
 
Old May 25, 2005 | 02:09 PM
  #1  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
New shiot!

For all of you out there that are like me and sick of the same old wheelies how about we make a list of all the stunts we can think of (their names and how to accomplish them) so next time you and your freinds are out riding you can pick up some pointers after your bored of the same old ****!
Old May 25, 2005 | 02:43 PM
  #2  
GYTR_RAPTOR's Avatar
Registered User
 
Joined: Feb 2005
Posts: 207
From: Waterloo,NY
GYTR_RAPTOR is an unknown quantity at this point
Re: New shiot!

Here are some of the moves i can pull:


High Chair: put your legs over the handlebars, and do a pop the clutch.

Stand up wheelie: begin a standard power wheelie, and then jump up onto the seat and attempt to balance the quad standing up

Spreader/ no footed: attemp a basic wheelie (clutch or power) and then stick both of your legs straight out so they are horizontal with the quad

Stoppie: drive slowly, like around 10mph, and then pull in the clutch. shift all of your weight forward and grab the front brake

No handed Stoppie: same thing as the stoppie, but when the rear of the quad comes up, take both your hands off the handlebars

One Footed Wheelies: same thing as a seat stander, but with 1 foot


these are just some basic tricks. we should all do somethin like this, and then think of somethin new to do. i think it would be pretty cool to stand on the front bumper and do a wheelie. you would have to operate the levers backwards. it would kind of be like a standup high chair if there was such a thing. anyways, post up people, lets get some new ideas goin!
Old May 25, 2005 | 03:18 PM
  #3  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

High Hold- Quad @ 12 oclock with One foot on peg (probaly brake side) one foot out directly behind you @ 9 oclock One hand on front bumper and the other controling throttle
Old May 25, 2005 | 03:21 PM
  #4  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

Bumper to bumper-aka the Rocking chair- one foot on front bumper one in grab bar and that's right... power wheelie to endo. or Endo to wheelie.
Old May 25, 2005 | 04:04 PM
  #5  
GYTR_RAPTOR's Avatar
Registered User
 
Joined: Feb 2005
Posts: 207
From: Waterloo,NY
GYTR_RAPTOR is an unknown quantity at this point
Re: New shiot!

wow, that rocking chair would be pretty damn tough! i might try that one. what about doing a stoppie/endo and then turning the entire bike like 90*? is that even possible?! that would be something cool to try!
Old May 25, 2005 | 04:43 PM
  #6  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

Funny you brought that up. Long story short. I needed to change my front brakes cause i destroyed them rollin out stoppies so when i was doing it i only changed the left side and went out and did an endo hooping it would 180 like a bike. Well it didn't even pick up it just slid the one tire. so i got her on two wheelies with the left side down and did a stoppie and **** if that didn't whip my *** around so fast it threw me of the damn quad. so now i do that with both brakes good and it stops at like 130-140 deg.
Old May 25, 2005 | 05:06 PM
  #7  
GYTR_RAPTOR's Avatar
Registered User
 
Joined: Feb 2005
Posts: 207
From: Waterloo,NY
GYTR_RAPTOR is an unknown quantity at this point
Re: New shiot!

wow, that is pretty sick! now there is a trick people should try, lol!
Old May 25, 2005 | 05:17 PM
  #8  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

where do you lock your feet people
Attached Thumbnails Click image for larger version

Name:	matt.jpg
Views:	21
Size:	18.6 KB
ID:	138720  
Old May 25, 2005 | 05:58 PM
  #9  
headache's Avatar
Registered User
 
Joined: Jun 2003
Posts: 428
From: Paragould, AR
headache is an unknown quantity at this point
Re: New shiot!

hey man i've been working on jumping from a seat stander to a sitdown wheelie the last couple times i've been out stuntin. I've rode it out a little a couple times, but it is being pretty hard for me. try it and see how it goes!!
Old May 25, 2005 | 06:07 PM
  #10  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

Done it man looks sweet. the only problem i have is when i jump it like picks the front up too high and if i leave the front down to compensate it drops when i land on the pegs. You...?
Old May 25, 2005 | 06:58 PM
  #11  
headache's Avatar
Registered User
 
Joined: Jun 2003
Posts: 428
From: Paragould, AR
headache is an unknown quantity at this point
Re: New shiot!

yep the front feels really high when i land sittting down and usually scares the crap out of me and i put the front end down.
Old May 25, 2005 | 10:51 PM
  #12  
Catman's Avatar
Registered User
 
Joined: Nov 2004
Posts: 1,788
From: Da Nati
Catman will become famous soon enough
Re: New shiot!

I am just learning that too. I do like I'm shifting through the gears and blip the throttle bring the front up a little and when i jump to the seat the front is just starting to come down and works fine
Old May 26, 2005 | 06:42 AM
  #13  
88crxsi's Avatar
Registered User
 
Joined: May 2005
Posts: 130
From: indianapolis, Indiana
88crxsi is an unknown quantity at this point
Re: New shiot!

Originally Posted by GYTR_RAPTOR
wow, that rocking chair would be pretty damn tough! i might try that one. what about doing a stoppie/endo and then turning the entire bike like 90*? is that even possible?! that would be something cool to try!

If you can do a high chair you can do it. I think it's a hell of alot easier. It kinda of stretches a few things lol, but it's not that hard to do.
Old May 26, 2005 | 09:18 AM
  #14  
HGR400ex's Avatar
Registered User
 
Joined: Oct 2004
Posts: 4
From: Whitewater, WI
HGR400ex is an unknown quantity at this point
Re: New shiot!

Originally Posted by headache
hey man i've been working on jumping from a seat stander to a sitdown wheelie the last couple times i've been out stuntin. I've rode it out a little a couple times, but it is being pretty hard for me. try it and see how it goes!!
dude when you do that just make sure that when you jump from the seat stander to the sit down to try and land in the middle of the seat. then if you feel the front start to go down just give it some gas. when i do that one i like to jump from the seat and land no footer, it is a lot funner.
Old May 26, 2005 | 09:36 AM
  #15  
BIGfugginRED's Avatar
Registered User
 
Joined: Feb 2004
Posts: 516
From: FREDVEGAS!!! va
BIGfugginRED is an unknown quantity at this point
Re: New shiot!

Originally Posted by HGR400ex
when i do that one i like to jump from the seat and land no footer, it is a lot funner.

amen. much better lookin too. i got the seat stander to the sit down on lock. try to land in the middle. or if you don't rock it back far enough when you jump, land on the back of it to pull the front back farther. or jump to the gas tank and point one toe to the east, and one to the west.

i wanna jump to a high chair from a seat stander. not climb, jump.

or seat stander, then manage one foot over the bar and jump to special K.

P.S. i posted a similiar thread like this a couple weeks ago and everybody just basically told me "just go out and have a good time and see what happens!" (too lazy to think... fockers) so i'll see you guys at the next comp with my secret weapon- the whats hap'nin!!! *****es.
Old May 26, 2005 | 09:37 AM
  #16  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

He guys we made some pegs that bolt on the side of the frame to stand on, there about even with the motor and bolt on to the top of the frame on a Trx 450 or 400ex they work great for crawlin allover the quad when it scraping and it's a good place to lock your feet.
Plus they come off with 4 bolts
Old May 26, 2005 | 09:37 AM
  #17  
BIGfugginRED's Avatar
Registered User
 
Joined: Feb 2004
Posts: 516
From: FREDVEGAS!!! va
BIGfugginRED is an unknown quantity at this point
Re: New shiot!



post up some homegrown vids pimp.

Old May 26, 2005 | 09:39 AM
  #18  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

Working on it, we gotta get some one to host 'em I'll try tonight
Old May 26, 2005 | 09:42 AM
  #19  
KUTZ's Avatar
Thread Starter
Quad Ridin Ninja
 
Joined: Sep 2004
Posts: 2,484
From: Wisconsin
KUTZ is a decent person
Re: New shiot!

Originally Posted by BIGfugginRED
i wanna jump to a high chair from a seat stander. not climb, jump.
Your gonna FU(K up the back of your legs if you make it, but hay when you try it have someone tape it
Old May 26, 2005 | 09:54 AM
  #20  
BIGfugginRED's Avatar
Registered User
 
Joined: Feb 2004
Posts: 516
From: FREDVEGAS!!! va
BIGfugginRED is an unknown quantity at this point
Re: New shiot!

yea it would definately hurt... but it would def. be some good footage. might be worth it.

i duct tape a pillow to the cross bar for practice...



All times are GMT -4. The time now is 05:41 AM.