Pitman arm/ Idle arm.. and maybe tie rod end...

 

OMR SUBCAGE (S)
OMR SUBCAGES available:

Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
• GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted


Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

hey wheelie we need a contract, badly

 

I was going to get one last night and I had it all set up then
I spaced it off and didn't realize the time and it was 12:01

I will get one tonight..

how many do we still have running???

 

Wish we could bid more than $1.99

 

Vegetables
Destination: Ceduna - South Australia - Australia
Tons Required: 1,268 (Approx. 63 Loads)
Contract Dates: 7/7/2009 - 7/14/2009
Min. Company Size: 6 Active Members
Max. Company Size: 25 Active Members
Current Low Bid: None
Current Low Bidder: None
Reward: $3,170.00
Penalty: $19,020.00

 

with a Ford that's more what I was thinking too.....

 

I just did them in my Yukon too.... now I have to do the CV axles...

 

i know i have to replace my control arms and ball joints... would that have anything to do with it? i checked my tires out at lunch and they looked ok.. minus the balding.. but didnt see anything cracks or breaking

 

thats your Problem why you get the shaking or wobbles....

Im guessing your whole front end is loose and needs alot of help...
what kind of ford is it??? yr?? Mileage??

 

Just got my Left side tail section

 

Just won the Tail light and Plastic around it...

 

01 explorer sport trac, 2001, 132k miles

 

Yep... Jack your front end up and grab the tires at 3 & 9 and shake back N
forth and you will see the Problem.... you shouldn't be able to move them
if everything is tight and good... have a buddy move them back N forth
and you crawl underneath and you will see all your joints move that
shouldn't be... (if that makes sence)

 

ya, when i took my truck in they put it on the lift, and the tires were wobbly... but how come all of a sudden yesterday it got worse and i can notice it like crazy... getting worse and worse?

 

because as you drive it more and more the tires are shaking in and out
which are loosening them up more and more... taking turns make
it even worse...

 

whats the worst that can happen if i dont get this fixed right away? rim falls off?

 

http://cgi.ebay.com/ebaymotors/Ball-...%3A1|72%3A1171

 

do you here any clicking or noise when you turn???

 

post.