the round bar will never catch an edge and send you tumbling down the street. I scrape going fast, real fast. With a flat bar, your wheelie has to be perfectly straight to scrape going fast. With the round bar, I dont have to worry about **** going wrong. I just let it fall back and scrape and nothing bad ever happens.


And I ride FIB every day. I did a nice long fib wheelie on the way to work this morning.

 

I have no tail, i like it for the scraping characteristics. I put my foot in it all the time. And I cant see the pic, but my bar is pretty frickin ugly. Id wager its as ugly if not worse than the pic juca posted.

In NY, NJ, and parts of Mass FIB isnt gay. Thats mostly in the sheep states.

 

and what's wrong with good old flat bar?

[YOUTUBE]http://www.youtube.com/watch?v=K6Deji0tVe4&feature=related[/YOUTUBE]

there is some sick dude from poland who got some wild fast scrapes on the street with his 900 rr but cant find it

 

fib tricks are gay why?

 

OMR SUBCAGE (S)
OMR SUBCAGES available:

Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
• GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted


Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

waz up older man roger?

 

round bars get dangerous after a while. (knocking on wood before I say this mike) but Mikes bar is razor sharp and would **** you up worse than a flat bar.

 

They all get sharp. But the round ones don't have the corners to catch the ground.

 

i thought you always wanted to empty the air out of your compressor. I always do anyway. I heard that if you dont it rusts up the insides or some **** like that

 

Agreed but Mikes bar is so sharp if it caught him, he'd be fucked up. He needs to do something with that coz his **** is dangerous

 

It's a good idea but most people are too lazy. Like me.

You have to open the drain on the bottom so that any water in there can get out.

 

my flat bars all looked like that too. thats what happens when you scrape them. nobody really does scrapes anymore around here

 

there is/was a trend on here to try to make your bike look as stock as possible. people who are into that are the people who hate on fib

 

heres my round bar , not really round but you get what i mean

 

mine is always at full pressure. emptying the water out of it is the thing to do

 

its got me in the back on 2 stoppie flips. didnt penetrate my jacket

 

what about flat bars with edges like this one? before 2 days i scrape it with 90 km/h sitdown and it works fine...i can bet that that will work much better then a round bar.



well i am off to bar bbl

 

or hold the entire thing upside down and blow it out the line

 

cant see it. its it somewhat triangular with a small scrape point a couple inches wide?

 

man did you ever threw your bike??? it got mirrors and blinkers and licence plate and wtf is that blue **** on your neck?