Omr subcages !!!!!!!!!!
†★ King of brake lines ★†
Joined: Jun 2008
Posts: 15,971
From: ™ ♥ ♥ ♣ ♠
Re: Omr subcages !!!!!!!!!!
So This morning I leave work to go to get breakfast. When I walk out to the parkign lot, i see my jeep is touching bumpers with the car parked in front of me. Im real uptight about parking and I would never park like that, so i figured that guy was an ******* and I left. A couple hours later I drive to another building, put it in park, and get out. as Im getting out, the jeep starts rolling backwards, wtf!! I get back in, run some tests, and confirm that park isnt working right. I got it to work by jamming it into park while im still moving at 1 mph.. it rolls a few feet, then clicks into park. Then later today I tried to reproduce the problem and it wouldnt happen, park just worked fine. Now every time i get out of the jeep I have to push it to test if its really in park 
its just a bad day for your jeep 
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Omr subcages !!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
†★ King of brake lines ★†
Joined: Jun 2008
Posts: 15,971
From: ™ ♥ ♥ ♣ ♠
I Have Too Much Free Time
Joined: Oct 2002
Posts: 16,023
From: Bangor, ME
Re: Omr subcages !!!!!!!!!!
We did a little exploring in Nassau and it wasn't bad. There is absolutely nothing in Freeport. One little "straw market" and two hotels. Beers were $8.50 at the bar by the beach.
I Have Too Much Free Time
Joined: Oct 2002
Posts: 16,023
From: Bangor, ME
Certified
Joined: Jan 2003
Posts: 13,786
From: Lauderdale
Re: Omr subcages !!!!!!!!!!
subframe came in yes, im waiting on someone with tools and know what they are doing lol...
i just need to do little things, like put on the rear brake caliper, front wheel spacer, attach throttle cables to the throttle, and solder my kill switch wires...
i think i might need new subframe bolts, im not sure if the ones that came with the newer subframe are the stock ones.. .some of them dont poke out on the backside where the nut goes on
i just need to do little things, like put on the rear brake caliper, front wheel spacer, attach throttle cables to the throttle, and solder my kill switch wires...
i think i might need new subframe bolts, im not sure if the ones that came with the newer subframe are the stock ones.. .some of them dont poke out on the backside where the nut goes on
Certified
Joined: Jan 2003
Posts: 13,786
From: Lauderdale
