I would even go with F4i Rims... I just need it to fit in the 900 swingarm..

 

OMR SUBCAGE (S)
OMR SUBCAGES available:

Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted


Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

sorry but i have no clue

 

DAMN... THere just as if not more $$$ for F4i rims...

 

its got the best oem brakes you can buy

 

I think Hooligan has a couple rims around... I will see...

 

arn't the 900 calipers the same?????

 

the rotors are huge

 

All I got is R6 and 636 wheels laying around over here....sorry


But for the front All you need to do is have the bearing seat on the f4i rim made bigger to take a 929/54 bearing and it ill work ....The back????

 

on the 929 or the 9hundo???

 

Oh and....

 

929/54 the rotors are almost the same size as the wheel

 

929

 

F4i RIms are just as much if not more.... I will just save
up a little and get the 929 rims to match the FE I got...

 

only the 954 has the same width axle as the 929. its the same wheel but with hollow spokes to shed a few ounces.

the rc51 wheel has the same outside diameter bearings as the 929/54, but a thinner axle. the brake rotor bolt pattern is identical also. that wheel is rare and more $$ than the 929 unfortunately

the f4i wheel uses the same brake rotor bolt pattern as the 929, but has a much thinner axle. i have heard of people milling pinchable collars to fit between the f4i axle and the 929 forks. if you have a friend with a serious mill or metal lathe you might want ot look into that. f4i wheels are cheap


hmm come to think of it i dont know what size bearings the 1000rr wheel uses. might want to look into that, those are becoming common now

 

 

I have a Lathe at work.. I might have to look
into the 1K wheels too...

 

f4i and 900 rear rims are pretty similar

 

look on stuntlife, not ebay. you can find them for 100-120 with rotors

 

internally yes, but they have different mounting points. the 929 used a different master which was more powerful than the 900's.