Omr subcages !!!!!!!!!!
NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
NealFoReal
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
Re: Omr subcages !!!!!!!!!!
Why is it EVERY time I work on a 636 they always hassle me??
So today I'm trying to get the new one back into 1 piece. The new (used) shifter side rearset had a bent shifter no big deal right? So I try to bend it back and the thing snaps off. Still no big deal I have another from the broken rearset that's not bent. But do you think the bolt holding all that **** together will come out?? NO... It striped out the Allen hole still not a big deal I'll just drill it out but then the other one starts to do the same thing....****!!!!... I have a 3rd bolt that is loose and ready to go but what the hell???
It should not be this hard to work on a bike!!!
So today I'm trying to get the new one back into 1 piece. The new (used) shifter side rearset had a bent shifter no big deal right? So I try to bend it back and the thing snaps off. Still no big deal I have another from the broken rearset that's not bent. But do you think the bolt holding all that **** together will come out?? NO... It striped out the Allen hole still not a big deal I'll just drill it out but then the other one starts to do the same thing....****!!!!... I have a 3rd bolt that is loose and ready to go but what the hell???
It should not be this hard to work on a bike!!!
I always run into problems when working on bikes 
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Omr subcages !!!!!!!!!!
Well your about as old as I am so.... Do you think it would be a good idea to jump on a cr250 never having rode a DB other than a fiddy and learn how to jump it 70+ feet?? then to add in tricks??
If it was in to a big *** foam block pit I could see it but other that I don't see it happening... The jumping part and the tricks I can see not being too difficult to learn... its just the getting back on the bike in time and landing that I can see going wrong..
If it was in to a big *** foam block pit I could see it but other that I don't see it happening... The jumping part and the tricks I can see not being too difficult to learn... its just the getting back on the bike in time and landing that I can see going wrong..
posting while beating off 
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Omr subcages !!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Registered User
Joined: Sep 2006
Posts: 11,214
From: St. Paul MN...
Re: Omr subcages !!!!!!!!!!
Well I know I cant just go buy a DB and start doing 70 feet.... but the off the curb and small jumps I have been doing for years with the R6-f4i's and 636....
Registered User
Joined: Sep 2006
Posts: 11,214
From: St. Paul MN...
Re: Omr subcages !!!!!!!!!!
Mike....
This p.o.s. I'm working on today was lowered by the last owner.. I need to take out the bolt and move it to the stock height hole. Would I be correct in thinking I need to lift the bike by the subframe to get it done??
This p.o.s. I'm working on today was lowered by the last owner.. I need to take out the bolt and move it to the stock height hole. Would I be correct in thinking I need to lift the bike by the subframe to get it done??
Registered User
Joined: Jul 2006
Posts: 10,842
From: Lewiston ME, USA
Re: Omr subcages !!!!!!!!!!
Just dropped off a load of clothing I guess I'll get started on the new contract or maybe one more on this one I'll have time to fly but the new one's kinda big. I also want to see where the supply is going to show up after tonight.
