Omr subcages !!!!!!!!!!
I Have Too Much Free Time
Joined: Oct 2002
Posts: 16,023
From: Bangor, ME
Re: Omr subcages !!!!!!!!!!
if you cut and weld your clutch arm you are risking cooking the bearings it rides on and if you make it longer then 10 mm i don't think you will b able to get your cover off with out having to cut the arm because you need to rotate the arm on an f4i to get the cover off ...
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Registered User
Joined: Jul 2005
Posts: 8,290
Re: Omr subcages !!!!!!!!!!
if you cut and weld your clutch arm you are risking cooking the bearings it rides on and if you make it longer then 10 mm i don't think you will b able to get your cover off with out having to cut the arm because you need to rotate the arm on an f4i to get the cover off ...
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr subcages !!!!!!!!!!
and welding the arm makes more then a little heat ....that and if you do it in the cover you can't weld the bottom ..
Registered User
Joined: Jul 2005
Posts: 8,290
Re: Omr subcages !!!!!!!!!!
oh snap! i actually figured out the concept. i'm just going to get another stock clutch arm drill one hole in the prexisting and the new one to line up, drill off the old stock arms rivets and i'm done.
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr subcages !!!!!!!!!!
you need at least two bolts or the arm will twist when you pull in the clutch but yes you will need to unbolt it if you ever need to take the cover off but thats no big deal
Registered User
Joined: Feb 2006
Posts: 23,660
From: down souf
Re: Omr subcages !!!!!!!!!!
night, buddy
i met this hot chic who killed twisties while i was at Deals Gap and by coincidence i found pics of her and alie kickin it on someone's myspace. didnt get to sleep with her though. i certainly would have, given the chance
i met this hot chic who killed twisties while i was at Deals Gap and by coincidence i found pics of her and alie kickin it on someone's myspace. didnt get to sleep with her though. i certainly would have, given the chance
Registered User
Joined: Jul 2005
Posts: 8,290
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr subcages !!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
SEAT SPREADER COMBOS
Joined: Dec 2007
Posts: 3,001
From: perth w.a australia
Re: Omr subcages !!!!!!!!!!
bingo
you dont even need another clutch arm you can just use a a peice of flat bar and drill three holes in it
I Have Too Much Free Time
Joined: Oct 2002
Posts: 16,023
From: Bangor, ME
Re: Omr subcages !!!!!!!!!!
I don't get why you are using two clutch arms. Are you calling the piece of flat steel a clutch arm? You're not going to buy a whole other rod and cut it up are you?
SEAT SPREADER COMBOS
Joined: Dec 2007
Posts: 3,001
From: perth w.a australia
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr subcages !!!!!!!!!!
Registered User
Joined: Jul 2005
Posts: 8,290
