Omr subcages !!!!!!!!!!
Re: Omr subcages !!!!!!!!!!
Hauling 60,000 pounds of Mail from Darwin to Geraldton will earn your driver $3.80 per mile, a total of $7004.09 for the entire route.
1800 miles, **** yeah
1800 miles, **** yeah
Re: Omr subcages !!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech

click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping


click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: Omr subcages !!!!!!!!!!
i'm confused. if i send him my stocker, then i can't ride. if i go out and buy another clutch arm and send it to him, what will he do?
i might as well cut the stocker and just bolt it on.
mike u did it right?
i might as well cut the stocker and just bolt it on.
mike u did it right?
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr subcages !!!!!!!!!!
if you are doing the bolt on mod you don't need to cut yours
Re: Omr subcages !!!!!!!!!!
it's really easy. couple holes in a piece of metal and couple bolts
Re: Omr subcages !!!!!!!!!!
My buddy welded mine
Re: Omr subcages !!!!!!!!!!
i wish i knew someone with a welder. i figured bolt on would be easy if i just got another stock clutch arm and used the preexisting holes. i guess the holes don't line up.





