OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

Ross doesn't know either


sorry

 

wagga wagga

 

Yeah Im wondering if I could take the piece off this motor to replace the cracked piece on my motor My motor was crispy. Everyone who rode my bike said I had one of the smoothest F4i's they ever rode. Now I got a beat up stunt bike

 

yeah, id say grab gaskets, pistons, rings etc. from parts unlimited or equal catalog is best bet...

 

Im sure its gonna be too much money. Itd probably be cheaper to buy another motor but like I said my **** was so smooth that it hurts to know that I cant use it coz of a crack Maybe I could have it welded again and when I dont drop the bike as much put it back in

 

Hold up - lemme post something.

 

i take it you found the problem?

cracked piece?... Doesn't sound good

 

yea, crack is one hell of a drug

 

just get yours welded again

Best Car & Motorcycle Insurance | Auto/Moto Protection Today | FREE Trade-In Quote

 

wagga wagga

 

Nah I'm talking about my original motor. Still havent found the problem with the motor I just put in. I replaced a whole bunch of **** and nothing. Brought it to Mikes and he couldnt figure it out. He said he thinks the motors fucked up and so did 2 other people who are both bike mechanics. I was gonna bring it to one of my boys crib who's a bike mechanic but he's busy the next few days. He was gonna run a compression test but he said that based on everything Ive changed if its still doing it something about the piston being scored or some **** like that and that the motor would have to be rebuilt. So I'm pretty much done with that motor. Why I was asking about the rebuild is because my original motor was minty crisp and ran amazing. Look on this picture. The circled spot is right where it cracked and is leaking coolant. I was thinking (depending on price) of using that whole section from the garbage motor and having my original one rebuilt using that piece I just dont know what something like that would cost. I'm assuming it wont be cheap but I dunno?

 

hey hey, the gangs all here

 

I dont wanna get it welded again coz I keep dropping it on the cage on the same side from trying to learn circles. I dont wanna have to get it welded and put it back in coz I'm sure with 1 nice drop its gonna crack again.

 

yezzir, crack is one helluva drug.

 

OMR's here From your experience old man, whats an estimate of how much it would cost to do what I just mentioned in the post with the picture Ballpark if you got an idea

 

http://www.samsclub.com/shopping/nav...&ci_sku=106011

 

that's crazy enough to work!!!

 

I read your comment and got a little happy - then I clicked the link and

 

about 1100 bucks