any real paint store can put it in a spray can for you ...got any ppg stores near you

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

yeah i found one right in my neighborhood. what do u recommend, buy the paint and clear from the factory and have PPG put it in a can?

 

if your just doing a seat cover ya

 

Get them at a tool supply shop for $25.

 

Absolutely.

As well as the small orange filters at the gun.

 

i'm planning on sanding it down and primering it first. the paint and clear will be factory so it should be ready to go, right? or does flexing agent still have to be added? also, i've seen a lot of paint companies say u should use their primer cuz chemically it's made to bond better. sounds believable but i'm not sure.

 

hey roger wanna brace the subframe on the 100?? everthing is clean and intact, no prior welds lol

i wanna pimp this little 100 out lol

 

cheap ones like from harbor freight?

 

if it's good then just don't destroy it

 

and i'd like to thank nags again for gettin me those pics.

 

ya i was thinking about leaving it alone.

but knowing me ill destroy it on accident sooner or later lol.

 

i have seen primer make paint wrinkle but if you ask the guy at the paint store im sure he will tell you what primer is safe to use with there paint

 

You always want to use primer if you're painting over another paint job. The other paint will bleed.

I didn't believe it until I got lazy one time and saw it happen

 

We buy our **** from some local tool supply place

 

i think i'm gonna get it from the honda dealership. i went to an auto paint store and they said they wouldn't be able to match factory paint exactly; they'd get close but not exactly.

hmm.... i dont think the dealership guys are really gonna know **** about paint. if they offer primer, then i'll get that along with the paint and clear.

 

u think i can skip the sanding part, provided it's smooth and well cleaned?

i'm not familiar enough with local tool supply places or brands other than ur typical Sears for common tools, or cheap **** like harbor freight.

 

no , get all the wax off of it , sand it and clean it

 

what i meant was for him to use primer but to make sure it was compatible with the paint he was gonna use

 

ur right.