word. i knew this was gonna break again coz im dipping to the left and droppin it right where the first break was and it was welded - so hopefully with one thats not broken it'll take the abuse a little more BUT Ima try to get the old one fixed too if possible - gotta see how bad it is once i take it out

 

lol true.

 

from what i was told is its in good shape except it doesnt have an upper. but the plastics are supposed to be in decent shape. iono tho - i guess ill see tomorrow when i go pick the bitch up. im really just concerned with the motor right now.

 

get delrin cage sliders. at least for that side

 

im probably gonna keep the whole bike minus plastics and bs like that. it has the headlight still and the stay. iono - ill see tomorrow but if i could make back $500 and still keep the **** i need, thatd be nice.

 

:YEAH

 

i think i have 1 left - so i should take the aluminum slider off that side? would it be better with no slider

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

if you spend enough time on my bike to get used to it, it'll start doing circles. It'll do it by itself cuz of the tire, you just have to keep the front in the right spot.

 

best would be delrin. they break, but they really do offer the best protection. theyre much softer than aluminum, and even more softer than the steel of the cage.

 

mikes gonna teach the kids to hit jumps:YEAH:YEAH

 

they hit the ramp at full speed, but they dont pull up or hop at all so they just roll off it. no good. i think theyre just not strong enough to hop their bikes

 

There hasn't been any snow at my house. I've had frost like 3-4 times. I still haven't had to scrape my vehicle.

 

teach them bunny hops

 

They're just not doing it. I did all that **** at their age.

 

Or a big kicker ramp. They'll have no choice but to fly.

 

Last winter, I didnt use my scraper once :YEAH

 

we have 2 ramps, both are 2'x4' pieces of plywood. One is 6" high and the other is 12" high. On the low one, they fly off it but it just doesnt have enough lift to send them anywhere. When they hit the bigger one, they lose too much speed. The boy is itching to go big, the girl doesnt really care for it much. I think the biggest problem is the weight difference between Austin and his bike. It weighs about 20 something, and he weighs about 40.

 

word. im probably just gonna do **** i know how to do where i wont drop your bike. id hate to destroy someone elses ****

 

word. ima check it out when i get home or over the weekend. at least for the left side. im 90% sure i have 1 delrin slider left.