Omr Subcages !!
Re: Omr Subcages !!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech

click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping


click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: Omr Subcages !!
Didnt get **** done but I know where the starter motor is now and it looks like the only way to get to it is to remove the tb's and drain the coolant as well coz theres some hoses that are right on top of it that I might have to remove
Ima do a search and see if anyone on here has posted info on it and if not start a thread to confirm whats the best way to get at it and then do work tomorrow. Hopefully this will fix the starting problem. Then I just gotta figure out why the idle is jumping all over and why its running a little rough
I could actually deal with it running rough coz it seems like it was running very rough at higher speeds. In the lot its noticeable but not as bad as on the highway. Anyway adios
Ima do a search and see if anyone on here has posted info on it and if not start a thread to confirm whats the best way to get at it and then do work tomorrow. Hopefully this will fix the starting problem. Then I just gotta figure out why the idle is jumping all over and why its running a little rough
I could actually deal with it running rough coz it seems like it was running very rough at higher speeds. In the lot its noticeable but not as bad as on the highway. Anyway adios









had mine 2 days now.... it gets alota vag.

