hows it lookin?

 

 

Havent even started yet Im about to head into the garage now tho and get busy. I need to ride this weekend or Ima kill someone.

 

Okay quick question. Chris told me to test the voltage on the battery which should be around 12. So that was good. He then told me to start the bike and the voltage should jump up to around 14 and if not then its the stator. When I started the bike the voltage dropped to the 10.x range and then went back up to around 12. So that means its the stator, right? The bike is starting by itself now when before it wasnt starting at all before

 

which battery did you use?

 

check ALL of your wiring connections for the engine too...sometimes when plugging in the connectors the wires will get pushed out of the back of the plugs.. look to see if all the wires are in all the way... is a big pain in the *** but trust me I've fixed a ton of **** by finding that the wire got pushed out the back of the connector causing a bad/weak connection...


also a fully charged batt. should be at least 12.4 volts if its at 12.3 or lower its needing a charge

 

just took out a loan for 5 grand. preparing for the Mack Titan

 

Sunday night im moving

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• We have an Old Duffer, but we dont have a current Duffer, currently. Contact OMR to apply for the position
• Stock05 isnt really even mexican, he pretends to be cause he thinks thats cool
• OMR has sex with his gas tank
• Mike M smells like sweaty vag
• Please ignore this line.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

I'm selling the DAF as soon as I get back to Moscow.. it will be out of fuel and have close to 300k on it time for a fresh whip and a new place to pimp it...

 

We need 27 loads and we got 26 either on their way to moscow or hamburg. i just left hb for moscow a couple hours ago. i think im selling sunday night

 

i need to ride soon too b4 i get rustish... now that i moved my ignition tonight the next time i go out hopefully i can clear my bars and successfully put my foot over them.. to be honest, i think that if i run clipons i can clear it for sure buuuut DBs for life hommie!

 

brapppp

 

I loaded up my last Euro load a bit ago.... it will be on the way 2nd thing in the am

 

the battery i bought a couple of months ago when i borrowed yours.

 

ill check it again tomorrow but im pretty sure it was at 12.4

 

rustish - i havent rode in 3 weeks and im going ****** nuts

 

i havent rode in 1 week

 

So I got 2 weeks on you son.

 

I had to take the month of Oct. off due to being sick as hell for 2 weeks then dealing with all the **** that went physically wrong with me being stuck in bed for that long.