I've still got 2 of those in use.

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• Join PAR Trucking on Trukz.com
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

if you replace the fuser, output rollers, and high voltage power supply, they'll pretty much run forever. 3's also, everything after that sacrifices longevity for performance

i was looking for a 4 or a 4+, i know ive seen a bunch of them around here. the desktop support guy gave me this one, gotta see if its better or worse than a 4

 

Not as nice as a 4 by a long shot. They were only like $200 new. I have 2-4s and a 5n in use that have been running forever.

 

damn

in that case im gonna keep my eyes out for a 4

 

I just bought a P3005dn that's really nice and my personal printer here is a Dell 5110cn color laser that they gave us for free when I placed a big order. I have those two and a Lexmark Optra R+ that sit on my desk.

 

you could literally park one corner of an suv on an LJ2 or 3 and it will still print afterwards

 

had some really old gas in there just wanted to clean them out.

 

The 1200 was the $400 version of the 1000. It should be comparable to the Laserjet 4. We had one and it's long gone so I guess it's not as good as the 4s.

 

i dont know what any of those are. all i know are old hp laser jets, and even older epson industrial dot matrix's.

 

P3005dn - double sided and network capable



5110cn - double sided and network capable, color laser



Optra R+ - Old School Laser Printer - Circa 1997



The 3005 is a replacement check printer for the optra. I'm keeping the optra as a backup.

 

uh oh

http://beaker.net.nz/printer.htm

 

We had a couple Epson 5000 dot matrix but replaced them with an IBM 6400. That ****** is almost 4' tall.

 

Now that I think about it, we had about 10 of them and I bet 7 didn't make it much past a year.

 

ehh should be fine

Print Speed Black, Letter:
Best Quality Up to 10 ppm
First Page Out 15 secs
Processor 48 MHz
Paper Trays, Std 1
Paper Trays, Max 1
Input Capacity, Std 250 sheets
Input Capacity, Max 250 sheets
Output Capacity, Std 125 sheets
Output Capacity, Max 125 sheets
Envelope Input, Std 30
Envelope Feeder No
Two-Sided Printing None
Typefaces None
Prints Color No
Print Quality, Black Best 600 x 600 dpi
Print Resolution Technology REt, Ultraprecise toner
Print Languages, Std Host-based GDI, DOS Box, HP PCL 5e emulation
Printer Management None
GENERAL
Duty Cycle, Monthly 7,000 pages
Media Types Paper (plain, bond, recycled), envelopes, labels, transparencies, vellum, card stock
Media Sizes, Std Letter, legal, executive, envelopes (no. 10, Monarch), index cards
Media Sizes, Custom 3 x 5 in to 8.5 x 14 in
Connectivity, Std USB (Windows 98, 2000, Me, and XP only)
Connectivity, Opt None
Media Weights 16 to 28 lb
Memory, Std 32 KB ROM, 1 MB RAM
Memory, Max 32 KB ROM, 1 MB RAM
Dimensions (W x D x H) 16 x 19 x 10 in
Weight 16 lb
Shipping Dimensions 19.7 x 15.7 x 17.7 in
Shipping Weight 23.9 lb

 

DFX5000's? I used to fix those, at my first computer related job. It sucked.

 

but how much use did they get? becky's gonna print when she has a paper due, which is only a few times a month. i havent printed anything for myself since the 90s

 

Yes, I couldn't remember the letters. I knew it had fx in it.

 

Some a lot, some not so much. The problem is with the paper feed. It starts grabbing 10 sheets to a time and no amount of cleaning helped. I never even looked into replacement rollers because some only printed a few hundred sheets before ******* up. They were replaced with 1020s I think. Those have been good. They're small but they work good.

 

Off to staples. I have to buy a printer and a couple laptop hds.