f4i oil pick up kit.

 

Oh.. never heard it called a baffle.

I've got the Stuntex pickup

 

does that oil pickup help with bog

 

That would only be 2,000

 

I used lucas tranny stuff in my 5.0 mustang 5speed and it helped easier shifts 1st to 2nd .

I got lucas in my truck engine oil . It bumps your oil pressure up though cause it makes the oil thicker .

 

I use a little thinner oil in conjunction with the Lucas

 

All done with the f4i for today. Did the plugs, oil, and lubed the chain. Time for a nap yaaaawn

 

My signature has somehow suddenly re-appeared :YEAH

 

Me too. It's not really a pick up, it's a baffle.
A little.
Royal purple in manual transmissions.

 

hmm.. theres an 02 f4i down here with no upper and **** with a rebuildable title for 1000 bucks

 

When i first bought the lucas engine oil additive , it was winter and i had it in my garage . I did an oil change on my truck , and went to put the lucas in and it was like jello and didn't want to pour out of the bottle .
I had to put the bottle in my house on a heater vent for almost a day to return it back to room temperature

Lucas is definitely thick , more than STP (aka Sticky Tiger **** , aka Stay Together Please )

 

ugh, I don't know if I should get that or not

 

Lucas is basically pure petroleum . When it heats up , it becomes thinner .

Lucas is designed to cling to parts of an engine . (or tranny)

I seen a demonstration where this guy had a sprocket with a hand crank on it . There were other little sprockets , next to the big sprocket , that were being driven by it . They were all enclosed in glass in had some lucas oil at the bottom of the glass case .

As you spun the crank on the big sprocket , the oil would be pulled up by the teeth of the sprockets and lubricate them all . When you stopped cranking , most of the oil would return to the bottom of the glass case , but the sprockets would still have a film of oil left on them .

That is why lucas says it helps decrease "initial start up" . That is when most of engine wear occurs .

When you start an engine , regular oil is at the bottom of the pan .

If lucas is added , in theory , the inside of the engine should have a film of lucas on the moving parts before start up .

 

All the Autozones here have that sitting on the counter

 

I can go on about Lucas , and cold weather engine ideas i have thought about , but it might bore you

 

I need to hurry up and decide about this bike and call the dude.

I could part it out and make money.. but I really want another full stunt f4i

 

stopped in to check some messages.....

 

OMR SUBCAGE (S)

OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

im getting rep from people and they say rep me back but they don't leave there name....lol

 

new page