Omr Subcage
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Omr Subcage
You'll need to do something to get the tie downs out far enough. Mine are set up a little too close to the edge and a little far back right now. I need to move the chocks. I have negative tongue weight at the moment. I throw 4 cinder blocks on the front to hold her down.
Embrace the Hate
Joined: Jun 2003
Posts: 5,806
From: connecticut
Re: Omr Subcage
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- Join PAR Trucking on Trukz.com
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Omr Subcage
Dont use anythign that comes in a sheet. somewhere along the line you'll leave a kickstand down, and it will wear a hole through anythign thin. 2x10's, 2x12's or that composite you mentioned would be better
Retired
Joined: Mar 2003
Posts: 37,967
From: .
Re: Omr Subcage
if they hang over by 1' then you'd need tie down points that stick out a foot. 2 caged bikes on my 5x8 open they have about 2-4" between the bikes, and about 2" between the cage and the trailer side rails.
If you get a 5' trailer with side rails a foot of space is not happening.
If you get a 5' trailer with side rails a foot of space is not happening.
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Omr Subcage
my 5x8 has 6" of clearance between the axle and the deck above it. If i drop it 6" there, the tail of the trailer will drop 10". Since its only 14" high, thats perfect to push a bike on easily.
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
I Have Too Much Free Time
Joined: Oct 2002
Posts: 16,023
From: Bangor, ME
Retired
Joined: Mar 2003
Posts: 37,967
From: .
Re: Omr Subcage
Most of the time you have to take the shitty old boat too. And a lot of them are way too long.
You send my bolts back up with them?
Embrace the Hate
Joined: Jun 2003
Posts: 5,806
From: connecticut
Retired
Joined: Mar 2003
Posts: 37,967
From: .
Re: Omr Subcage
Baseball man date is my guess.
Re: Omr Subcage
Whew.. What a day.
bp chaser
Joined: Oct 2002
Posts: 85,653
From: LI, NY and I drive in Australia
Re: Omr Subcage
While i was pulling it out of a hole in the ground, it actually lifted the back wheels of the jeep off the ground. I had to rebuild the crane so that it lifted from only 2 feet past the back of the trailer instead of 4.
Oh, and the 500 lb chunk of concrete, we "shook" it off the trailer going 60 mph. It bounced along for almost a thousand feet, destroyed a section of curb, a chain link fence, and then dented the guard rail. It was pretty sweet.
