weeerdevrybodygo

 

We're afraid of vampires. I had to run and get my cross and garlic.

 

i love garlic...




OMR SUBCAGE (S)

OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!

 

garlic kicks ***. i hear its good for you too

 

APE CCT all done. :YEAH

 

all adjusted and ****?

 

you didn't need to take the clutch cover off..

 

Yup yup. Im going to get ready now. Weather says 30% chance of rain around 9 so we gotta get it in now just in case.

 

I know but my boy said thats how he did it and that was the easiest way to check for tension. Im glad I did though coz I never to the cover off before so at least I got to see what goes on in there. But I adjusted it with the cover off so that there was about 1/4" of play in the chain and it was still rattling like crazy when I started it with everything back on. Then I just tightened it by hand until the rattling was gone and gave it a 1/4 turn more and tightened it. No rattling and no pinging like if it was too tight. Im becoming a mechanic sort of. :YEAH

 

did you warm up the bike before you made the final adjustment ?

 

if too tight it will make like a high pitched whirl type noise

 

Not really but after I tightened it up I let it run for 5 minutes or so and didnt hear any noise. ****. If I dont hear anything I should be good though, right? And if I start hearing noise while I'm riding, can I keep ridng til I get home and tighten it more later?

 

Yeah thats what I saw on the cbrforum post. That if too loose it will make the same rattling or too tight it will make a pinging noise like youre speaking about. It sounds smooth though right now.

 

a little rattle wont hurt it but too tight can cause some damage...

 

going to the post office brb...

 

Okay so if it starts rattling again, I'll tighten it a little more later. Should I use some lock tite on the lock nut or just leave it? It looks like it could rattle loose

 

Yo Mike I'm leaving in about 10 minutes.

 

yo neal we're gonna have some company today. my friend don and his friend kevin are coming out with an f4i to beat up

 

No doubt. Are they good? Itd be nice to have someone there whos worse than me.

 

i'm ****** hungry and broke.

refinance goes down either tomorrow or next week. 5 ******* % on a 20 year, baby!!!