OMR SUBCAGE [subframe cage]
Re: OMR SUBCAGE [subframe cage]
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech

click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping


click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
Re: OMR SUBCAGE [subframe cage]
you ******* see this???
its T-ice
http://www.clickcomplete.com/jail/default.cfm?PID=1.5&inq_key=&action=editprofile&ja il_inmate_link=4324&jcl=5827
its T-ice
http://www.clickcomplete.com/jail/default.cfm?PID=1.5&inq_key=&action=editprofile&ja il_inmate_link=4324&jcl=5827
Re: OMR SUBCAGE [subframe cage]
Where the hell did that come from
Re: OMR SUBCAGE [subframe cage]
Ah, I see.
Re: OMR SUBCAGE [subframe cage]
that ************ needs to be run up on and fucked up before he gets a chance to pull out his badge!!! ******* cops are cowards, man. pure cowards. they hide behind their ******* guns and shields.
Re: OMR SUBCAGE [subframe cage]
I know.. I'm so mad. Theres so many things I should have done but I was SOO mad it was a blur. My friends mom is a big time DA down here. I should have got his name and had her do work on him.
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: OMR SUBCAGE [subframe cage]
Re: OMR SUBCAGE [subframe cage]
Yea, he's fine.. Just shooken up
Re: OMR SUBCAGE [subframe cage]
Dead blow hammer. and ball peen hammer for finnished dent. skim of body filler. sand until smooth. recoat filler if need. you a high build primer that you also might need to sand and reapply a few times. the key is always prep work. after the base and clear it helps to do a good wet sand and buff job. makes it look that glass!
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: OMR SUBCAGE [subframe cage]
Dead blow hammer. and ball peen hammer for finnished dent. skim of body filler. sand until smooth. recoat filler if need. you a high build primer that you also might need to sand and reapply a few times. the key is always prep work. after the base and clear it helps to do a good wet sand and buff job. makes it look that glass!
Re: OMR SUBCAGE [subframe cage]
a lot of people go put a down on a car. but this *****'s gonna go get him a stunter :YEAH






