do your forks leak at all?

 

we have 40+ drivers heading to yellowkinfe with fruit and something like 70 going to la with appliances

 

I do it with them on the bike....I just move the bike a bit to get at the hard to reach spots...scuff till all the gray-black-brown is gone on both sides...You will have to re-seat the pads ( stop hard a few times) them they will work good..
If your rotors were bent you would feel it in the lever as a bouncing feeling...
Try re-bleeding also if they are soft right now...just keep the fluid off them new pads

 

you should be able to look up the front with 2 fingers....


also your front master may be leaking fluid past the seals....stock f4i masters are junk!!!!

I got a 05 r6 radial master on mine

 

Nope.

 

I think that guy jwt on the utopia forum is gonna go for appliances to charlotte tonight for real low

 

Definitely cant lock up with 2 fingers. Can what you're saying about the front master happen from a drop coz this happened from 1 drop and then I just left it and now its all fucked up.

 

I think I'm gonna do the scotch bright **** first and if they still dont lock up then I'll swap the for the used rotors I got in my garage. If that dont work then I'll buy a new master and see whats up. **** man I just want brakes. I'm always fixing something thats fucked up.

 

Thats a team player and there's enough of them that I can go for the money routes :YEAH

 

OMR SUBCAGE (S)

OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position!
• The 01-03 GSXR's have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subcage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage

 

It could have.. a seal could have got compressed sideways enoff to crack...letting fluid past when apling the bracks hard

 

Whats the best master to get for the F4easy?

 

any radial master will be a BIG improvment over the stock p.o.s. you got now...

like I said I got a 05 R6 radial master on mine....

I got a f4i master I could send you for the cost of shipping... but it needs a cover-lever-and the removable bar mount thing...

 

stock

remote reseviors brake easier

 

 

Cool let me see if its the master first. If it is I'll hit you up for that.

 

I've always heard that radials better. Besides the res braking easier, isnt the braking powers better? More feel?

 

much more power and feel

 

Looks nice.

 

226 miles to go.