The new O.M.R. sub-cage thread!!!!
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: The new O.M.R. sub-cage thread!!!!
i expected that to be ur response but with "*******" instead of smart *** 
here's another little piece of info. these companies that go drill over there, it costs them millions PER DAY to drill out in the gulf, especially in deep water, and very often they end up drilling just to end up with a hole that produces NOTHING. on average only 1 in 7 boreholes actually produces. imagine the amount of money that takes... and how much money they must be making off that one borehole.
here's another little piece of info. these companies that go drill over there, it costs them millions PER DAY to drill out in the gulf, especially in deep water, and very often they end up drilling just to end up with a hole that produces NOTHING. on average only 1 in 7 boreholes actually produces. imagine the amount of money that takes... and how much money they must be making off that one borehole.
i seen a sign some where that broke down the prices of things by the gallon like gas ,paint ,finger nail polish and spring water ,in comparison gas was pretty cheap especially compaired to fingernail polish that **** is like gold.....lol
lol, how did we ever make it before computers? that reminds me, we actually had to use the card catalog and the dewey decimal system to look up books. now there are computers to do that ****, and u can even look to see if they have a book on shelf from home via the net.
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: The new O.M.R. sub-cage thread!!!!
OMR SUBCAGE (S)
Subcages available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
Subcages available:
Honda
- CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02
- R6 - 03, 04, 05 <<< click here
pay pal accepted
Tech
- The 03-06 CBR 600RR & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position!
- The 01-03 GSXR's have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
click here to contact >> old man roger
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: The new O.M.R. sub-cage thread!!!!
Originally Posted by Trachito 
lol, how did we ever make it before computers? that reminds me, we actually had to use the card catalog and the dewey decimal system to look up books. now there are computers to do that ****, and u can even look to see if they have a book on shelf from home via the net.
lol, how did we ever make it before computers? that reminds me, we actually had to use the card catalog and the dewey decimal system to look up books. now there are computers to do that ****, and u can even look to see if they have a book on shelf from home via the net.
Registered User
Joined: Feb 2006
Posts: 23,660
From: down souf
Re: The new O.M.R. sub-cage thread!!!!
1 out of 7 is more then i would have expected ...
i seen a sign some where that broke down the prices of things by the gallon like gas ,paint ,finger nail polish and spring water ,in comparison gas was pretty cheap especially compaired to fingernail polish that **** is like gold.....lol
i seen a sign some where that broke down the prices of things by the gallon like gas ,paint ,finger nail polish and spring water ,in comparison gas was pretty cheap especially compaired to fingernail polish that **** is like gold.....lol
i really think the people here in the u.s are begging for an economic lashing with all their fuel consumption. even i've been looking at a gettin a big truck but i think i'm gonna stay with the Tacoma. at this rate, we're gonna look like those 3rd world countries where the streets are full of small engine bikes and an entire family rides on one moped, LOL.
Registered User
Joined: Feb 2006
Posts: 23,660
From: down souf
I Chose to No Longer Post
Joined: Jun 2004
Posts: 7,096
From: ♀♀♀♀♀♀♀♀♀♀♀♀
Re: The new O.M.R. sub-cage thread!!!!
http://www.pbase.com/rinod/image/67541760/original
not hating on nags but specs speak for itself!!!
Nikon D200
1/125s f/5.6 at 34.0mm iso200 full exif
is better then a D80
and the pic u copied n pasted is a smal size(reduced brings down the quality) look at the full size of the link i posted thats how u see the quality look at my rotters!!!
not hating on nags but specs speak for itself!!!
Nikon D200
1/125s f/5.6 at 34.0mm iso200 full exif
is better then a D80
and the pic u copied n pasted is a smal size(reduced brings down the quality) look at the full size of the link i posted thats how u see the quality look at my rotters!!!
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: The new O.M.R. sub-cage thread!!!!
http://www.pbase.com/rinod/image/67541760/original
not hating on nags but specs speak for itself!!!
Nikon D200
1/125s f/5.6 at 34.0mm iso200 full exif
is better then a D80
and the pic u copied n pasted is a smal size(reduced brings down the quality) look at the full size of the link i posted thats how u see the quality look at my rotters!!!
not hating on nags but specs speak for itself!!!
Nikon D200
1/125s f/5.6 at 34.0mm iso200 full exif
is better then a D80
and the pic u copied n pasted is a smal size(reduced brings down the quality) look at the full size of the link i posted thats how u see the quality look at my rotters!!!
not to mention nags was like 100 feet away when he took this pic....
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: The new O.M.R. sub-cage thread!!!!
you can see the heat wave off the exhaust in this pic..........
the freckle on tony's lip.............
the rubber hanging off the rear tire.......
hell you can see the skin wrinkling on tony's nose from the negetive g-force......lol
the freckle on tony's lip.............
the rubber hanging off the rear tire.......
hell you can see the skin wrinkling on tony's nose from the negetive g-force......lol
Last edited by old man roger; Feb 20, 2008 at 01:14 PM.
Retired
Joined: Mar 2003
Posts: 37,967
From: .
Re: The new O.M.R. sub-cage thread!!!!
lol, how did we ever make it before computers? that reminds me, we actually had to use the card catalog and the dewey decimal system to look up books. now there are computers to do that ****, and u can even look to see if they have a book on shelf from home via the net.
I Chose to No Longer Post
Joined: Jun 2004
Posts: 7,096
From: ♀♀♀♀♀♀♀♀♀♀♀♀
Re: The new O.M.R. sub-cage thread!!!!
theres a price difference for a reason roger ITS THE SAME COMPANIE SAME CAMERA!!!! One is more expensive!!!!
I Chose to No Longer Post
Joined: Jun 2004
Posts: 7,096
From: ♀♀♀♀♀♀♀♀♀♀♀♀
Re: The new O.M.R. sub-cage thread!!!!
i do agree that nags pic looks better but again the conditions where different
bottom line D200 is better then the D80 end of story!!!!
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: The new O.M.R. sub-cage thread!!!!
i guess he's a better photographer!!! but i dont think nags can argue that the D200 is the better cam and the dude was just passing by the spot didnt set it up or nothing!!!
theres a price difference for a reason roger ITS THE SAME COMPANIE SAME CAMERA!!!! One is more expensive!!!!
theres a price difference for a reason roger ITS THE SAME COMPANIE SAME CAMERA!!!! One is more expensive!!!!
nags was a pro for a while so he is a good photographer
I Chose to No Longer Post
Joined: Jun 2004
Posts: 7,096
From: ♀♀♀♀♀♀♀♀♀♀♀♀
Re: The new O.M.R. sub-cage thread!!!!
i just checked the D200 is 300$ more............like i said each camera has its uses.........depends wat u will use the cam for maybe the D80 is better suited to shoot stunting lol
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: The new O.M.R. sub-cage thread!!!!
