LOL i can just picture u trying to stuff **** between some tiny gap in ur mouth. musta looked retarded

 

My truk just broke down but I repaired it so I'm at a 12 now. I'm 60 miles from chitown with some milk.

 

the sound is the worst part

 

+1

 

I could vouche for that. The sound is one of the nastiest/funniest things I've ever heard

 

OMR SUBCAGE (S)
subcages available
Yamaha

• R6 - 03, 04, 05 <<< click here

Honda

• CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600rr & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position!
• The 01-03 gsxr's have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lowers 3 inches wider (Then stock)
• All other models are in the stock location except they are rotated on there axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.

 

LOL

http://www.jibjab.com/view/128741

 

ok i didn't work yesterday so i gotta work today ,i need to finish up 4 subcages and some one dropped off a gsxr 1000 last night for a subcage, subties,and a round bar......

post at yall later

 

do it up lil homie

 

My clip ons are coming in today. So here's the plan for tonight.

Remove DBB's
Install clip ons
Swap front stock brake lines w steel braided lines
Bleed front brakes
Solder some wires
Remove shotty brake light job I did the other night

I think thats it. The question is will I get that all done in one night?

 

definitely wont get it all done

 

Whats new guys

 

i drove the truck an hour late

 

Thats what I was thinking. Ok then my goal is to do the clip ons and brakes. I'll do everything else another time. As long as I get the clip ons installed I'll be good but I'm aiming high. I'm gonna go home early today to work on the bike. Its so nice out now too but its supposed to rain

 

not unless u work late and proficiently.

 

I got 1 arrived a day late on my record. I was too busy at the truckstops with hookers and cocaine lol.

 

i'd shoot for intalling the clip ons and prepping for the installation of the steel lines by removing the old ones.

 

I suck when it comes to working with my hands and on bikes. On my gsxr I got it down to where I could swap out the whole subframe in an hour coz I broke it so many times. I know how to bleed the brakes and I dont think swapping to clip ons will take too long. But I always say **** like that. I always go into the garage thinking its a 20 minute job and I'm sitting there for 4 hours or some **** retarded lol

 

I gotta go all the way with the lines if I do them coz I wanna ride tomorrow and I dont wanna have to deal with ****. I'll probably bring my bike with me to work tomorrow so its gotta be ready to go.

 

yeah, well swapping the lines should only take 5 minutes