Omr Subcage
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr Subcage
OMR SUBCAGE (S)
subcages available
Yamaha
- R6 - 03, 04, 05 <<< click here
- CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02
Tech [list][*]The 03-06 CBR 600rr & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position! [*]The 01-03 gsxr's have the pegs moved out two inches because of the big tail section[*]THE 07 600RR pegs are located 2-1/2 inches lowers 3 inches wider (Then stock)[*]All other models are in the stock location except they are rotated on there axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.[*]


Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr Subcage
i think you need to cut your clutch lever down so you can work the clutch and the break at the same time..
and what kind of adapter is it ? you shouldn't have to weld it
and what kind of adapter is it ? you shouldn't have to weld it
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr Subcage
well if the adapter is the type that just slides in then put a hose clamp around it to keep it in and if it's a full throttle one then tighten the inside part
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr Subcage
nope its just that the hole that the adapter goes in was designed for a gravity feed from the resivour but know there is pressure the so if you just put a hose clamp around the master so it holds the adapter in tight then it shouldn't leak any more and will give you a firmer feel at the break lever ...
if it still leaks after you do this then that means you messed up the oring putting it in but i bet the hose clamp will fix your problem...
welding a master can cause alot of problems i wouldn't do it
if it still leaks after you do this then that means you messed up the oring putting it in but i bet the hose clamp will fix your problem...
welding a master can cause alot of problems i wouldn't do it
Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Thread Starter
also known as OMR

Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida











Re: Omr Subcage
chipmunks doing rap ..what next..lol







