OMR SUBCAGE (S)
subcages available
Yamaha

• R6 - 03, 04, 05 <<< click here

Honda

• CBR F4i - 01, 02, 03 will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02

$175 Shipped

Tech [list][*]The 03-06 CBR 600rr & the 03-05 Yamaha R6 pegs are lowered and moved back and out for better peg position! [*]The 01-03 gsxr's have the pegs moved out two inches because of the big tail section[*]THE 07 600RR pegs are located 2-1/2 inches lowers 3 inches wider (Then stock)[*]All other models are in the stock location except they are rotated on there axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.[*]

 

ive also recently learned the rc uses smaller rotors. i was lead to beleive it used 929 rotors. so i'll have to make new caliper brackets also



that doesnt really look too hard to do

 

or machine the end of the axle and the part it screws into

 

the rc51 is supposed to be a race bike, why doesnt it have 929 brakes? man everythign should have 929 brakes lol, they're the ****

 

i might sell these off and buy a hohey triple clamp

 

see if the inserts out of the other forks will fit in those forks

 

forks have inserts?

 

wait, i know how to do it.

i need an rc51 axle and wheel bearings. and thats it

to ebayyyyy!!!!

 

i know the OD of the bearings is the same for both

 

and spacers

 

yes some do just loosen the pinch bolts and they slide out ,some times you need to tap on them ...and some only have the threaded side as an insert ...

will the rc 51 bearing fit in the 929 wheel and is the width the same ?

like is the distance between the forks the same on the rc 51 the same as the 929 because if it's not then the axle wont work even if the bearings fit

 

about $100 from raon ayers for all the ****, axle, spacers, collars, bearings

 

Will THey Fit the 900????

 

no .

 

if the threaded end of the 929 fork fits in the rc51 fork and there is no insert on the other side then all you will have to do is get a couple mm taken off the big side of the 929 axle and that would be butter

 

03-04 600rr forks fit your bike, sort of

 

can i see the other fork like this

 

time for bed

 

929

 

Squid Droonk Question... Are the 900 Forks Junk????

I havnt had any Probs but I wouldnt mind Upgrading if there
is an Upgrade to them ..