cesarstuntz

went down twice,trying to park it and my cage bent.how do i fix the cage now.

Kaneone

depends on how it bent.. and just becuase its a little bent, does that mean its bent to the point to were it broke.. or just bent?

they are designed to bend and flex and take the blunt of a wreck. ive had 5 905 cages in the last 7 months ive gotten pretty used to how they work....

ive had some cages wher they bent so bad we had to remove them with a hacksaw... but that kinda ruins the cage... ive had some good expirence though when my cage bent hard to the left i put the bike on the 12bar and pushed in over on the left and it helped bend it back towards the right...

another thing i did that helped once was remove the rear bolt... the top rear engine mount bolt. i was having a prob with the cage taking out my oil filter constantly, and one the one cage i had, after i removed the bolt it pushed the cage forward and bend the connecting bar towards the headers some and gave me the clearance i needed...

kane

ah8u-up

if it bent trying to park it, what will happen if it drops from a 12'o... try another cage with POWER......

bill parr

there is alot of force when and if the bike just slams over from 12, aaraon will straighten it for you just give him a call.

IMR-COLBY

buy a powers cage that will fix the problem

Mikie

I woundnt recommend trying beinding it back, I broke mine recently, but theres not much you can do. Try falling evenly on the left/right side to even it out!

MikeM

ditto what kane said. Mines a little bent too, still works great.

bill parr

you know, i love my 905 cage but i keep popping welds, usually the cross bar that goes between the headers. just broke that weld. ****, no time to send it back, ill re-weld it myself. lets put that schooling to use...

PRESTON

call Aaron at 905 and he will take care of it..

bill parr

i know he will, this is my second cage, i just dont have the time to ship it out there to get re welded. weather in wisconsin changes by the minute, so when you get a good stretch you have to roll with it, besides its a fairly simple weld and i have the equipment to fix it.