Does anyone on the baord know or wheelie a 99 yzf 600R I try but its really only working in 1st gear. The bike is alot heavier then the R6. just wondering if anyone has tips.. I have broken 3 adjusment plates from wheeling, that plate doesnt seem beefy enough to take it.

 

I would tell you that any bike can wheelie just fine -- it's the rider that matters. BUT if you are breaking **** trying to wheelie, I wouldn't keep doing it

 

I know what you mean but i wheelie that bike in second gear all the time my friend has one and i stagger my feet on the front and rear pegs get up to around 30mph bounce the front then when it's about to rebound i clucht it and it's airborne

 

I think i figured out why the plate breaks, it hasnt done it anymore. Im still not pro at wheeling, but bouncing the front? I can get it up in first alright, still learning. i have tried really hard in 2cnd to get it up but it hasnt happened, all stock except a D&D exhaust.

 

Anyone else here own a YZF 600R? trying to see what others think about it for a wheelie bike

 

Are you clutching it up? If so it should go up in 2nd gear. Just like MEACHAM said, any bike will go up. Take your time.

 

yeah i clutch, but ill be at 9G before the thing even lifts 3" off the ground.... doesnt seem to work... maybe slippin the clutch to fast? to slow?

 

all i can say is practice

 

in time u will have that thing in the air , just be patient

 

when i lived in boston there was a kid at the taunton industrial park on a fzr 600 and he was damn good on it too he did everything i was shocked its his stunt bike cant remmeber his name though he maybe on here ill ask my boyz from boston

 

i used to ride a fzr600 and i got it up in 1st 2nd and 3 for a sec.
just bounce and clutch it will cut up

 

I ride a 95 YZF 600R. I can wheelie it in 2nd & 3rd(I also sprocketed it down 1, up 2) but on stock gearing I learned 2nd. Just practice, and learn to set one down a little softer if you're breaking stuff. Save that last bit of RPM's to set it down.

 

My buddy has a 99 zyf600r, i have ridden it quite a bit, he has dropped one tooth in the front. It does good in first gear, but i'm with you, second is a challenge. I can do it, but its easier if you go with a bounce/clutch combo. Just tag team it and it'll be all good.

 

My buddy has one, he would always tell me that the thing would not wheelie in 2nd but, when i jumped on it and I could wheelie, Not the greatest but it will do them

 

yeah if anyone knows anyone else who stunts that bike, i would wanna know what mods they do to it. You guys think that someone could windscreen wheelie? its pretty high, prolly to high to get legs over without cutting it up By the way, what is bouncing? like stand up and actully bounce bike? like lean forward and pull up hard when i slip clutch?

 

You can definatly crank'em up on a 99 yzf 600 . a friend of mine had one that i used to wheelie in second with no clutch at all just a bounce . you should clutch it though so you have more rpm to work with just ride that things balance point . im from mass to where do you ride ??/

 

Use your legs, and arms, but your legs and body are the most momentum you can give, and lean back when you're on the up swing

 

Im from framingham, right now im in school at amhesrt. im going home this weekend and i ride wherever whenever i can. Just alot is going on now cause midterms but i plan on riding saturday and sunday morning

 

If your riding in northern mass or southern NH check out the local spots !!! youll have that bike in third never mind 2 cruisin your balance .

 

whats some local spots?? im gonna try to get out this weekend.. i know how to get around lowell pretty well and dracut.