dont have a front harness is there anything i can do to start my 05 600rr wit out the front headlight harness

 

On the 02 F4i ya have to bypass the tipover sensor which is located in the headlight wire area not sure bout the rr tho

 

I went to a local Honda dealer, they gave me a diagram and witch wires to cross?

 

so is it red wit white and green

 

no dude... it wont work if u cross the cables... i burned to many fuses trying that crap... yes the cbr of that year has a tip over sensor and it is nessesary to start the bike, its impossible to over pass that sensor.. trust me i tryed red-green white-red gree-and all the ******* colors.. dont work that way.. yes i was pissed... and i had to but a sensor.. they go for like 30-50 bucs on ebay

 

You're an idiot. Yes you can bypass the tip over sensor, i've done it on 4 different 600rr and they never had problems... You can bypass ANY tip over sesor...

IIRC its a green and red wire on the 600rr, and then just leave the middle one alone..

 

so get the harness wit the tipover ?

 

but the tip over isnt there theres no headlight harness

 

Trace the 2 wires back to the next connector and splice them there...
the whole headlight harness has another connector somewhere on the bike so that you can remove the whole front end with harness attached.. Find that connector, and then find the right color wires ON THE HEADLIGHT harness side. Then on the other side of the connector (the main harness side) cut the wires and connect them..

 

thanx just making sure i wanna ride its been sitting in the middle of my house calling my name lol yea i trace it back and its red wit white and a green ima go and try it right now

 

Thats if you want the whole headlight harness completely gone.. It'll definitely have a much cleaner look..

 

Try it now and give me an update

 

didnt work ?????

 

didnt work ima just take it to the shop im
i wanna ride already
its driving me nuts

 

go on 600rr.net theres alota good info there im sure some one can help u

 

sometimes connectors get rust build up while setting for long (esp. with honda). That happened with my rr had sensor though no head light connectors, it did cranck but no start.

took of tank, on the side where fuse box is pleanty of connectors on the air box took them off and cleaned them up and started right up. sometimes you can not see the rust on connectors but it is there so get the brush and clean with some cleaner. This may help elimnate other possibilites.

 

you can bypass it, how do you think guys run streetfighter setups on 600rr's? 600rr.net is the place to check it out.

 

ha got it but its wasnt none of that **** u guys said lol it was the kill switch a pin was out on it i was riding all morning thanx for the help u guys rock

 

yeah i bypassed my motor with a paper clip started rite up

 

I have mine bypassed, pm me, when I get home I can tell you the wire colors.