serious

Damm. I should start looking for a 636 then

f4ikid13

used the search engine for clean air mod.........didnt find shizz,,,,,,,can you post direct link atown thaks

f4ikid13

soi just spoke to a friend and he said his f4i did the same **** and it was his cam chaine tensioner, said the stock one was worn out put in an after market one and it was all *******.......what you think...........i do hear lil vibration under the tank at about 5 gran in every gear

ATOWN1101

https://www.stuntlife.com/forums/164...=klean+air+mod check the 12 and 13 post its got pics!! i dont no y but the thread is called klean air mod . plus if this is happening when the bike gets hot take out the thermostat hard wire the fan and use engine ice. F4i are a bitch when this happens mine does it still when it gets hot. but only when it reaches over 220

ATOWN1101

how bad is the ticking does it rattle real bad? the f4i came chain makes some noise and even if the tensioner is a little wore out it wont make much difference but if she is clanking away replace it

l Bolo l

Did you do this yet? If not go do it and stop trying to figure out other problems that it might be when this most likely will fix it right up for you.

ATOWN1101

i dont understand your ? you want to no if i have done this then ya i have done all the mods to my bike. that is y im letting him no what the problem could be. i ride with 5 F4Is and each one of our bikes have had this issue. most of the time its cause of to much air or the bike getting to hot.

crazy636stunter

just start by taping 1 side off. if that does not help, then move on to the next fix!

Mikey SBF

Ive done it all and actually found that changing my oil helped out a bit too.

I know it sounds crazy but it got rid of half the bog, it still bogs but its getting better.

Ive done:

new plugs
tape the box
change the oil
clean air mod

all of it and it still bogs out at times.

Austin913

<--- you need the sauce.

f4ikid13

thanks fellas i havent had time but taping the box off will be the first .......as soon as do it ill let you know how it went......

l Bolo l

No the questions was for F4ikid, I was just saying your explanation was probably right on and he needed to try it instead of continuing to look for other possible problems.

f4ikid13

I taped it off and it definetly helped a lot . I get ver lil bog when the bike is at like 225........gonna put my fan on a switch. O and can i put a 1000 fan on my radiator...wil it bolt on,,,,,,what bigger fan set up will work....my friend puta 1000rr on his 600rr.that **** stays really cool.....they all havr rr's and cal my bike a dinosour,,,,,,they dnt know whats good for them lol.....thanks

l Bolo l

Did you do the clean air mod yet?

f4ikid13

i just looked into it..... looks hella easy.....will do it 2 marrow,,,,,,,,, what size is the "T" valve i need, i wanna buy before i open up the bike........what size are the hoses......????? thanks

JOHN J

kleen air mod, 2nd idle cable and a 60 tooth sprocket plus practice will take care of it all

razor rich

Half inch im pretty sure

f4ikid13

thanks man will do early in the morning.......

What do you do with the stock metal part that the hoses are removed from...the t clamp takes its place .........is the original hose connector removable

RUNNER

some one told me that my 05 gsxr 750 will keep up with the gsxr 1000.is this true? and for that matter my friend got on my bike and rode it and they said it pretty much feels like a paper weight. meaning no power. wats the reason for this? any info is really helpful!!!

f4ikid13

...........i had a gsxr then an 06 600rr and now an 02 f4i wich is the most fun bike ive rode out of the three .......i dono man im a honda fiend....the gsxr was my first bike and ive only been riding for a year 3 month........honda is the ****