what u riding?
Thread Starter
r6 destroyer
Joined: Apr 2009
Posts: 138
From: calhoun,ga. usa
Re: what u riding?
i dont disagree with you guys at all but i run an old skool 98 zx6r which 98 to 02 zx6r and 05 to 08 zzr600 are all the same exact bike with very small changes, parts are super cheap and fairly easy to find, si makes a great cage, alot of the 03 04 636 parts like the HHD dual cali fits it like a glove. Its a carbed bike however but the ONLY problem ive had is long scrapes and stalls on the bar the bike just quits, other then that its a dream, i run a 60 tooth and its super snappy and smooth as ****, idle pull is ok not great but good. ive personally riden the 636 all years and they are good but i feel like my bike has much more power and response, they have a **** load more idle pull tho. Endos are cake with i think 48 mm forks no inverted but i crank like 250 ftrs and 180's with no trouble, does circles, i dunno what the one guy is saying about coastrs, i kill them too. the frames have some weak points but only if you crash it and the forks smack into it, ive riden mine for three years hard and just replaced the frame over a small crack. heres a pic and a vid, hope this helps, if you have any questions just ask.
http://vimeo.com/5178757 theres the link
http://vimeo.com/5178757 theres the link
the zzr is wrecked in the frt. and the forks need replaced. the guy i am getting it from has a set of forks for an 03 zx6rr with triples i am getting going to see if they will fit the zzr frame. the zzr is an 05. if they fit it will give me the inverted forks. what year model zx6 parts interchange with the 05 zzr
www.tobefast.com
Joined: Aug 2008
Posts: 1,115
From: Pikeville, Kentucky Pike County
Docs GLOCK 17
Joined: Aug 2007
Posts: 71
From: Boise, Id, USA
Registered User
Joined: Feb 2008
Posts: 60
From: Syracuse, NY
Re: what u riding?
the zzr is wrecked in the frt. and the forks need replaced. the guy i am getting it from has a set of forks for an 03 zx6rr with triples i am getting going to see if they will fit the zzr frame. the zzr is an 05. if they fit it will give me the inverted forks. what year model zx6 parts interchange with the 05 zzr
everything interchanges, the differences are mostly cosmetic like fairings and ****, the frame changed to a better mount style but doesnt affect motor fitment or anything. and i KNOW that f4i front forks will fit the bike if you change the races, so anything that fits the f4i will certainly fit that zzrframe front end wise.
Registered User
Joined: Jun 2009
Posts: 35
From: Lincoln, Ne
Re: what u riding?
not a one of the bastards work!!!!!!!! ive had better luck customizing f4i parts to work. honestly 919's suck ***** to stunt. nothing is made for the bike and ive had to hand make most things.
Thread Starter
r6 destroyer
Joined: Apr 2009
Posts: 138
From: calhoun,ga. usa
Re: what u riding?
don't worry; i am still on the 919 every day. i have put 16k mile on it in a little over a year. but it is my daily rider and i do not want to trash it. if i hit 12 to hard and break the rear frame it is not replacable. reweld or but a new frame. send some pics of what you have doen to yours though. i would like to see it.
Administrators
Joined: Jan 2006
Posts: 55,201
From: Arizona bbiittccheezzz
Re: what u riding?
I have a 98, 900RR frame
01, 929 forks and wheels
02, 919 Motor
Stuntride Subscriber
Joined: Jun 2009
Posts: 318
From: here and there...
Re: what u riding?
i have been thinking about that as well...just to keep it in the Yamaha family and what is holding me back is the fear of not being able to find parts...I guess this is somewhat reassuring but still...
Registered User
Joined: Jun 2009
Posts: 35
From: Lincoln, Ne
Re: what u riding?
don't worry; i am still on the 919 every day. i have put 16k mile on it in a little over a year. but it is my daily rider and i do not want to trash it. if i hit 12 to hard and break the rear frame it is not replacable. reweld or but a new frame. send some pics of what you have doen to yours though. i would like to see it.
Registered User
Joined: Jun 2009
Posts: 35
From: Lincoln, Ne
Re: what u riding?
sorry i should have clarified more, i have a 919 and i cant take anything off a 929 or a 954 other than the pegs and i can only use all three EXCEPT the right passanger peg. it is some weird *** size. And i can use the sprockets but thats about it lol.
Thread Starter
r6 destroyer
Joined: Apr 2009
Posts: 138
From: calhoun,ga. usa
Re: what u riding?
there is not much that interchanges. nothing as far as cages 12 bars and stuff. they are some places you can get a crash cage for the 919 but they are not as strong as the si cages and some of the others. a company called venture cycles i think it is makes some mounts that replace the grab bar for different things that i have thought about getting and make a 12 bar coming from them. have not went that far yet.
Thread Starter
r6 destroyer
Joined: Apr 2009
Posts: 138
From: calhoun,ga. usa
Re: what u riding?
there is not much that interchanges. nothing as far as cages 12 bars and stuff. they are some places you can get a crash cage for the 919 but they are not as strong as the si cages and some of the others. a company called venture cycles i think it is makes some mounts that replace the grab bar for different things that i have thought about getting and make a 12 bar coming from them. have not went that far yet. 919.org has some other items that might intrest the 919 owners
