i just got new plugs for my 07 gix 600 and dont now what to gap them at and i just got a new tank whats the best way to get the old cap off with no key

 

goodluck, why do you need to get the cap off
Don't think there is a way to get that gas cap off without a key bud, thats what the lock is for

 

the plugs gap is set already when you purchase them


And I'm not sure if its like a honda, but on honda plugs they SPECIFICALLY say you should never re-gap them

 

i just boght it and it had the cap on it still with no key i could just drill it or take it to the smith but just asking b4 i was my time

 

hey i just found a key to that lock ill send it out to u soon( i think it is to that lock dont hurt to check

 

SPARK PLUG GAP

• Measure the spark plug gap with a thickness gauge.
• Adjust the spark plug gap if necessary.



Standard: 0.7 – 0.8 mm (0.028 – 0.031 in)

 

plugs are pre gapped when you buy them. just screw the new ones in and your ready to fire

 

if that key doesnt work, let me look at my gas cap.i did a write up on how to rekey them. since the tank is off, you MAY be able to wiggle the cap out with some finesse, or try pushing the angled part with a screwdriver from the bottom after you take all of the screws out of the top.. if so, i can prolly get you fixed where you just need to stick a key in to turn it.

if you have aim, hit me up on there: jebova2301

i can prolly explain it better there

 

got the cap off just drilled into it an the bitch opened up