For all the fellas with 636 what set up do you have for the hand brake??? I know about ho hey but I guess I'm lost on what brake caliper I should get???Sorry if I sound like a **** tard

 

i have a 2008 zx10r master on my 03 with the line goin into the foot master and usein the stock caliper. im jus learnin still and im not on the hand brake at all yet. i kno its not the best but i does good ive seen it in action before from the previous owners

 

Im running the GPtech system, Im a relative noob so it works ok for me. once i get better i'll be running a better system..but hohey's system is

 

you should go with the hohey 4 piston setup and use any radial mastercylinder and you'll be money, best setup period

 

yeah hohey 4 piston is the best!!!!!!

right now i have a dual caliper set up with a 08 R6 radial master and SS lines. its really really nice, but i thew on the hohey 4 piston and its sick!!!

i'm back to striaght up DC, but i'll be running the hohey 4 piston soon.

 

i would get the regular hohey set up cause on the four piston caliper you have to modify the brake pad a little

so if you want the regular dual caliper set up you just need another 636 rear brake caliper and bracket along with a 16x18 brembo in steel lines

 

It might roll with j twiz's advice..

 

hohey,,,,heyho

 

4 piston and a brembo 16 x 18

 

Im running the full throttle hand brake with the block master that ties to the fork tube... looks super **** but has a loose feel...
I like it...

 

dose any one have pics of the fullthrottle hand brake on a 636. i cant get it to clear the clutch lever vary well

 

You have to take the dust cover thing off, and the nut on the clutch lever... Vortex clip ons help,on the stock 636 clip ons the bar runs into the fork tube as the vortex run in front of the fork tube which gives youore room...