Does anyone know if 06 and up gixer forks will bolt onto an 02'F41? has anyone done this? all help is appreciated, thanks.

 

Yes, they do and Mofat has just put a gsxr front end on his bike, in the top few pages of recent posts. You need a 929 lower triple and top triple and it should bolt right up

 

do you know if it will work with the gixer triples?
cause i have the whole thing.

 

If you got bearings that will work it should but just go with what's proven.

 

thanks for the help, whats the advantage with inverted forks anyways? and i noticed some people using newer gsxr masters on their brakes what are the differences?

 

I was told the lower triple would not work but the top may....https://www.stuntlife.com/forums/281...roject-so.html

 

lower triple will drop in with no problems. Upper triple will work if you get a aftermarket bearing to fit in the frame. Same works for R1 forks and triples.

Here is the bearing you need:
https://www.stuntlife.com/forums/2-s...-bearings.html

 

The easiest way to do it is get 929 upper and lower triples. Then the forks, rim, rotors,brakes from the gixxer.

You can try to use the gixxer triples with custom bearings and all that if your feeling lucky. I just went with what I know works to save me the headache.

You can see my post turtle is talking about I posted a couple pics. My shed got about 3 inches of ice all over it so I can't get the doors open to take better pics. I'll get more when it thaws out.