I need to get my idle higher than the choke lets it. I stunt a 03 gixxer600.HELP!

 

Here's what ya do. Get an idle adjuster screw and bracket of of a 99 or 00 Busa. Take the stock screw out of the left side of the throttle bodies. Put the one out of the Busa with the long cable in it's place. Loop it out of the side of the frame and bend the bracket flat and use the bolt for the front of the coolant res. to attach it. Notch your fairing for clearance and it will stick up right in front of your left knee. Easy access and you are ready to rock.

 

You can also adjust the fast idle adjustment screw. When you say choke, you are actually referring to the fast idle (fuelies dont have a choke). Lift up your tank and follow the cable from the fast idle adjuster on the left clipon to where it connects to the throttlebodies. You will notice an adjustment screw. From there, you can adjust how high the fast idle will raise the rpms. The best way to do it is to crank the bike and let it idle with the fast idle set all the way open and adjust that screw to where you want it to idle when it is set all the way open. You cant get too crazy with it but you should be fine if you are wanting to idle to around 4-5K RPMs when the fast idle is wide open.

 

If you can get an idle adjustment from a 900rr you can just weld that to the stock Gixxer idle screw. I did that and it works awesome.

Mellen