05 636 Subframe (pics, reinforced, info, suggestions)
06-23-2008, 08:42 PM
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: St.John's,NL,Canada
Posts: 851
05 636 Subframe (pics, reinforced, info, suggestions)
Ok, So this is the second time Ive cracked my subframe, wondering if anyone had pics or have any "good" advice on reinforcing, building or anything on the 05 636 subframe...
Ive searched the forum and couldnt find anything.. so the title should be good for the search if this thread gets any valuable info!!
Ive searched the forum and couldnt find anything.. so the title should be good for the search if this thread gets any valuable info!!
06-23-2008, 08:55 PM
#3
Squid Extradoinaire
Join Date: Oct 2005
Location: NE INDIANA
Age: 39
Posts: 5,893
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
tell me where you guys want them reinforced and ill do it. i have 2 stock subframes in my garage. my buddy has a tig. its that EASY!
06-23-2008, 09:05 PM
#4
Registered User
Join Date: Sep 2005
Location: The Bay Area
Posts: 3,675
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
06-23-2008, 11:15 PM
#7
Registered User
Join Date: Jun 2004
Location: Toronto
Age: 42
Posts: 3,289
06-23-2008, 11:22 PM
#8
Registered User
Join Date: Sep 2005
Location: The Bay Area
Posts: 3,675
06-23-2008, 11:29 PM
#9
A Few Loose Screws - DVD
Join Date: Sep 2002
Location: Compton
Posts: 4,078
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
i would like one asap too. the subframes are weak gaaabage. im on #4...most the cracks are from just clutching it up with foot in the bar.
06-23-2008, 11:50 PM
#10
Registered User
Join Date: Jun 2004
Location: Toronto
Age: 42
Posts: 3,289
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
If it wasnt for him I wouldnt have 05/06 stays, he needed that too...
06-24-2008, 12:06 AM
#12
Registered User
Join Date: Sep 2005
Location: The Bay Area
Posts: 3,675
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
Well I really only have time for that kinda stuff in the winter, Id rather be ridng and he doesnt want his bike apart for a week to build it. I dont really feel like making one and Id much rather just be able to buy something, but as far as we know there isnt anything out there. He ******* needs one though cause that **** is weak as ****, his bends up instantly and cracks if he smacks the round bar too hard...For now just to get by we might brace one up with some plate...
If it wasnt for him I wouldnt have 05/06 stays, he needed that too...
If it wasnt for him I wouldnt have 05/06 stays, he needed that too...
me and him need one asap!!!!!
06-24-2008, 12:37 AM
#13
Registered User
Join Date: Dec 2004
Location: North Little Rock, Arkansas
Age: 41
Posts: 910
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
If someone can get me a good one.. Then I have a guy that can make some gangster ****.. I have been meaning to do the same for my 06-07 zx6r.. Dont be so fat Guru and it want break.. lol...
06-24-2008, 01:32 AM
#14
Registered User
Thread Starter
Join Date: Jul 2006
Location: St.John's,NL,Canada
Posts: 851
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
wow... looks like im not the only one having problems.. imma go to work on mine tomorrow.. and see what I can rig up.. Im gonna reinforce mine and possibly build one soon.. ive been sizing it up.. and trying to find the best places to add plates.. as well try not to interfere with the undertrays and exaust.. anyway.. Ill keep yall posted tomorrow!!
06-24-2008, 03:05 AM
#16
www.sicriders.com
Join Date: Mar 2003
Location: San Diego, CA
Posts: 784
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
I blew one subframe and then modified to protect the second one. I know that not alot of credit is given to opinions of sponsored riders, but I asked Racing905 to make my current set up.
The 905 12bar has a plate over the top of the 12 bar toward the front of the bike. This plate bolts through both subframe tubes transferring the hit to the solid square tubing rather than the cast rear piece.
Now combine their subcage with a bar that runs from the subcage to the 12 bar mounts and you have triangulated some strength for your subframe at the back where you hit it. I run this set up with no exhaust, but I believe it would not be in the way if you run aftermarket exhaust. the stock big can might be in the way?
anyway, here are some pics (i could not find many pics with the pegs on) of my setup:
The 905 12bar has a plate over the top of the 12 bar toward the front of the bike. This plate bolts through both subframe tubes transferring the hit to the solid square tubing rather than the cast rear piece.
Now combine their subcage with a bar that runs from the subcage to the 12 bar mounts and you have triangulated some strength for your subframe at the back where you hit it. I run this set up with no exhaust, but I believe it would not be in the way if you run aftermarket exhaust. the stock big can might be in the way?
anyway, here are some pics (i could not find many pics with the pegs on) of my setup:
Last edited by SIC Nate; 06-24-2008 at 03:08 AM.
06-24-2008, 06:42 AM
#17
squid hunter
Join Date: Mar 2004
Location: connecticut
Age: 39
Posts: 2,079
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
I blew one subframe and then modified to protect the second one. I know that not alot of credit is given to opinions of sponsored riders, but I asked Racing905 to make my current set up.
The 905 12bar has a plate over the top of the 12 bar toward the front of the bike. This plate bolts through both subframe tubes transferring the hit to the solid square tubing rather than the cast rear piece.
Now combine their subcage with a bar that runs from the subcage to the 12 bar mounts and you have triangulated some strength for your subframe at the back where you hit it. I run this set up with no exhaust, but I believe it would not be in the way if you run aftermarket exhaust. the stock big can might be in the way?
anyway, here are some pics (i could not find many pics with the pegs on) of my setup:
The 905 12bar has a plate over the top of the 12 bar toward the front of the bike. This plate bolts through both subframe tubes transferring the hit to the solid square tubing rather than the cast rear piece.
Now combine their subcage with a bar that runs from the subcage to the 12 bar mounts and you have triangulated some strength for your subframe at the back where you hit it. I run this set up with no exhaust, but I believe it would not be in the way if you run aftermarket exhaust. the stock big can might be in the way?
anyway, here are some pics (i could not find many pics with the pegs on) of my setup:
06-24-2008, 10:44 AM
#18
...
Join Date: Jun 2003
Location: Us
Age: 35
Posts: 9,589
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
I blew one subframe and then modified to protect the second one. I know that not alot of credit is given to opinions of sponsored riders, but I asked Racing905 to make my current set up.
The 905 12bar has a plate over the top of the 12 bar toward the front of the bike. This plate bolts through both subframe tubes transferring the hit to the solid square tubing rather than the cast rear piece.
Now combine their subcage with a bar that runs from the subcage to the 12 bar mounts and you have triangulated some strength for your subframe at the back where you hit it. I run this set up with no exhaust, but I believe it would not be in the way if you run aftermarket exhaust. the stock big can might be in the way?
anyway, here are some pics (i could not find many pics with the pegs on) of my setup:
The 905 12bar has a plate over the top of the 12 bar toward the front of the bike. This plate bolts through both subframe tubes transferring the hit to the solid square tubing rather than the cast rear piece.
Now combine their subcage with a bar that runs from the subcage to the 12 bar mounts and you have triangulated some strength for your subframe at the back where you hit it. I run this set up with no exhaust, but I believe it would not be in the way if you run aftermarket exhaust. the stock big can might be in the way?
anyway, here are some pics (i could not find many pics with the pegs on) of my setup:
damn, not hating but that looks retarded on the bike
06-24-2008, 11:11 AM
#20
Registered User
Join Date: Jun 2004
Location: Toronto
Age: 42
Posts: 3,289
Re: 05 636 Subframe (pics, reinforced, info, suggestions)
+1 Id be making something that looks stock, just like my 03/04 billet subframe...With integrated solid Titanium round bar
Id need a trashed subframe to chizzle apart to scan the square tube sections, so that I can get the geometry to cut those out of solid on the water jet....
Id need a trashed subframe to chizzle apart to scan the square tube sections, so that I can get the geometry to cut those out of solid on the water jet....
Last edited by JohnnyP; 06-24-2008 at 11:14 AM.
