spreader info ?

Thread Tools
 
Search this Thread
 
Old May 12, 2008 | 08:54 PM
  #1  
clutchitup21's Avatar
Thread Starter
lets ****in ride!!!
 
Joined: Jan 2008
Posts: 921
From: indiana
clutchitup21 is a decent person
spreader info ?

i have been practicing spreaders for a few days.... i only get the bike up to a 45 degree angle and ride it out till i have no gear left..... i dont want to go any higher with out a hand brake.....i know you should have one if you put it at bp.....so what i am asking is , do i need a hand brake yet.... or should i just keep doing what i am doing and not try to put it at bp......
Old May 12, 2008 | 09:37 PM
  #2  
clutchitup21's Avatar
Thread Starter
lets ****in ride!!!
 
Joined: Jan 2008
Posts: 921
From: indiana
clutchitup21 is a decent person
Re: spreader info ?

?????
Old May 12, 2008 | 09:40 PM
  #3  
Black03R1's Avatar
Registered User
 
Joined: Jan 2006
Posts: 653
From: RuffBuff Ny
Black03R1 is an unknown quantity at this point
Re: spreader info ?

Originally Posted by clutchitup21
?????

I was doing them last year no HB..but to be on the safe side and be able to bring it back all the way im putting on a HB.
Old May 12, 2008 | 09:41 PM
  #4  
chadnine's Avatar
Registered User
 
Joined: Nov 2006
Posts: 1,519
From: swingin with the pinetrees
chadnine is a decent person
Re: spreader info ?

The Good Ole Days Have Left The Building
Old May 12, 2008 | 11:28 PM
  #5  
kj's Avatar
kj
Registered User
 
Joined: Nov 2004
Posts: 2,277
From: South of Boston, 781
kj is an unknown quantity at this point
Re: spreader info ?

I learned spreaders last spring w/ no handbrake... and I'm SOOO GLAD that i did it that way. It taught me a shitload about engine brake and that will give you a ton more confidence and control once you finally do put a hb on.

Just turn the idle ALL the way down and keep the revs high. If you have decent gearing you can actually slow down and scrape w/ no hb.

This is just b4 I put my hb on...



And this is after... it just gives you more confidence, cause I hardly touch it doing spreaders or any other straight line combo for that matter. Just a tap here and there.

Old May 12, 2008 | 11:41 PM
  #6  
EZEC's Avatar
Embrace the Hate
 
Joined: Jun 2003
Posts: 5,806
From: connecticut
EZEC is a splendid one to beholdEZEC is a splendid one to beholdEZEC is a splendid one to beholdEZEC is a splendid one to beholdEZEC is a splendid one to beholdEZEC is a splendid one to beholdEZEC is a splendid one to beholdEZEC is a splendid one to behold
Re: spreader info ?

Originally Posted by clutchitup21
i dont want to go any higher with out a hand brake.....i know you should have one if you put it at bp.....
....no hb

Name:  first08002.jpg
Views: 9
Size:  23.7 KB
Old May 12, 2008 | 11:46 PM
  #7  
kj's Avatar
kj
Registered User
 
Joined: Nov 2004
Posts: 2,277
From: South of Boston, 781
kj is an unknown quantity at this point
Re: spreader info ?

Originally Posted by EZEC
....no hb

hey... stop makin my spreaders look weak ya dick!!
Old May 12, 2008 | 11:52 PM
  #8  
old man roger's Avatar
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: spreader info ?

any thing above an idle wheelie requires no brake but like black03r1 said "better safe then sorry"

i learned with out one also but why not have it there just incase
Old May 13, 2008 | 07:52 AM
  #9  
TL MILLER's Avatar
Registered User
 
Joined: Nov 2005
Posts: 1,685
From: Fort Collins,CO
TL MILLER is an unknown quantity at this point
Re: spreader info ?

<<<<--- Not Using My Hb
Old May 13, 2008 | 08:41 AM
  #10  
eazenutz33's Avatar
Registered User
 
Joined: Aug 2004
Posts: 3,733
From: .......
eazenutz33 is an unknown quantity at this point
Re: spreader info ?

learned without one.....but also learned on the highway too!
once I had the handbrake figured out it was cake in the lot to set it right on idle.....now if I can get myself to feather the clutch a smidge I could try dropping it into a circle!
Old May 13, 2008 | 08:50 AM
  #11  
clutchitup21's Avatar
Thread Starter
lets ****in ride!!!
 
Joined: Jan 2008
Posts: 921
From: indiana
clutchitup21 is a decent person
Re: spreader info ?

well i stand corrected..... i guess i will try to put it at bp then thanks guys
Old May 13, 2008 | 08:57 AM
  #12  
villa76's Avatar
Not guilty
 
Joined: Aug 2006
Posts: 4,016
From: Detroit, MI
villa76 is a splendid one to beholdvilla76 is a splendid one to beholdvilla76 is a splendid one to beholdvilla76 is a splendid one to beholdvilla76 is a splendid one to beholdvilla76 is a splendid one to beholdvilla76 is a splendid one to beholdvilla76 is a splendid one to behold
Re: spreader info ?

just by your spreaders from shopzilla^^^^^^^^^^^^^^^^
Old May 13, 2008 | 10:27 AM
  #13  
clutchitup21's Avatar
Thread Starter
lets ****in ride!!!
 
Joined: Jan 2008
Posts: 921
From: indiana
clutchitup21 is a decent person
Re: spreader info ?

Originally Posted by villa76
just by your spreaders from shopzilla^^^^^^^^^^^^^^^^
Old May 13, 2008 | 11:32 AM
  #14  
SCOTT_Chychul's Avatar
Registered User
 
Joined: Oct 2004
Posts: 3,058
From: Canada
SCOTT_Chychul has a little shameless behaviour in the past
Re: spreader info ?

Originally Posted by clutchitup21
Bring it up till the fairings block where you are going and thats somewhere around balance. The good thing about it is that the tach should be right infront of your face. Watch it and when the rpms stop climbing you are high enough, which is not balance point yet. So from there you can roll a BIT more and the rpms will drop and thats when you will get the floaty feeling. Dont be scared of it though cuz if you chop the gas at that point you will still come back down.
Old May 13, 2008 | 11:44 AM
  #15  
SuicideMyk's Avatar
Registered User
 
Joined: Jan 2005
Posts: 471
From: Floriduh
SuicideMyk is an unknown quantity at this point
Talking Re: spreader info ?

Originally Posted by clutchitup21
i have been practicing spreaders for a few days.... i only get the bike up to a 45 degree angle and ride it out till i have no gear left.....
My girl has been practicing too, she gets it up to 75 degree and then I ride it out till there is no gear left
Old May 13, 2008 | 08:27 PM
  #16  
clutchitup21's Avatar
Thread Starter
lets ****in ride!!!
 
Joined: Jan 2008
Posts: 921
From: indiana
clutchitup21 is a decent person
Re: spreader info ?

:YEAHi just got done riding and i took all your advice...... i got it up to bp several times and i can hold that ****** for a long time...... i am gonna take my time doing them at bp for now..... all i have to say about it is.. THAT **** IS ******* FUN!!!!! i had some friends watching me and they are calling me crazy and sayin i need to stop cuz they dont want to see me get killed.... i think they are jealous cuz none of them can even ride a wheelie lol..... they dont want me showing them up infront of the ladies lol..anyway thanks for the help guys:YEAH
Old May 13, 2008 | 08:33 PM
  #17  
Standupnfall's Avatar
Registered User
 
Joined: Jul 2006
Posts: 2,596
From: NY
Standupnfall is a decent person
Re: spreader info ?

Pics?
Old May 13, 2008 | 08:36 PM
  #18  
DIRTYJEFF636s's Avatar
Registered User
 
Joined: Mar 2008
Posts: 2,798
From: MECHANICSBURG P.A.
DIRTYJEFF636s is a decent person
Re: spreader info ?

Originally Posted by SCOTT_Chychul
Bring it up till the fairings block where you are going and thats somewhere around balance. The good thing about it is that the tach should be right infront of your face. Watch it and when the rpms stop climbing you are high enough, which is not balance point yet. So from there you can roll a BIT more and the rpms will drop and thats when you will get the floaty feeling. Dont be scared of it though cuz if you chop the gas at that point you will still come back down.
THAT MADE THINGS ALOT MORE CLEARER FOR ME..THANKS
Old May 13, 2008 | 08:38 PM
  #19  
SCOTT_Chychul's Avatar
Registered User
 
Joined: Oct 2004
Posts: 3,058
From: Canada
SCOTT_Chychul has a little shameless behaviour in the past
Re: spreader info ?

Originally Posted by DIRTYJEFF636s
THAT MADE THINGS ALOT MORE CLEARER FOR ME..THANKS
YOUR WELCOME PRETZEL BOY
Old May 13, 2008 | 08:42 PM
  #20  
DIRTYJEFF636s's Avatar
Registered User
 
Joined: Mar 2008
Posts: 2,798
From: MECHANICSBURG P.A.
DIRTYJEFF636s is a decent person
Re: spreader info ?

Originally Posted by SCOTT_Chychul
YOUR WELCOME PRETZEL BOY
WAS THAT HIM THAT PULLED UP IN UR DRIVE WAY?



All times are GMT -4. The time now is 04:29 PM.