I bought an already stunted out F4i for a good deal the other week. Already had to fix a couple things & I'm on the last thing, trying to get this cage on.

He sold me a Tygershark stunt cage with the bike, but it wasn't installed & had never been used. I can't figure out how to get it on there. I don't think I've got all the hardware.

Items I got

both side cages with springs, rubbers, & slider + bolts for those.

2 longs bolts - I'm assuming for the motor mounts.
2 shorter bolts - For the lower subframe bolts.

2 long spacers - For the lower subframe bolts
1 shorter spacer - I'm assuming for the motor mount.

Should I have gotten another short spacer for the motor mount on the other side. With the way the cage is made it doesn't fit in the hole on the frame so I think I would need the spacer.

Plus, the two longer bolts. They have about 3-4 inches of rod from the bolt head before the threads start. There's not enough threads to get the cage snug before running out of threads.

If I didn't explain good enough I can take a picture tomorrow.

Any help is appreciated.

 

contact tygershark at 4083324861 for your questions and possible parts needed

 

Thanks, I got up with him. He's gonna call me back and send all the correct mounting hardware.

 

The longer bolts are for the subframe, the shorter ones for the motor mounts. And yea, you're missing one spacer.