Full Throttle Bill Does It Again! New Hand Brake Era.
01-08-2008, 09:23 PM
#1
hate practitioner
Thread Starter
Join Date: May 2004
Location: murder mitten
Age: 38
Posts: 5,491
Full Throttle Bill Does It Again! New Hand Brake Era.
Next generation hand brake is done!
So what is it? Well it's the product of everything we've learned making hydraulic components and at the same time the answer to various complaints people have voiced over the four years we've been in the stunt industry. The high points are below, more information follows and the pictures are at the bottom. Give us a call toll free at 877-785-7282 and let us help you step up your game in 2008!
This hand brake is:
Variable Ratio
One model fits all sport bikes
No modification to the rear master cylinder is nescessary
No reservoir on the bar! (the stock res. on the rear master supplies the entire system)
Single caliper, no additional rear caliper is needed
Full use of the foot brake is retained
The hand brake can be used while still applying pressure to the foot brake
the handbrake lever and the clutch lever can be mounted extremely close together
every pivot point is on bearings
Controllable Herculean power at your fingertip!
It is mounted on the fork to remove it from the vulnerable position on the handlebar (in the event of a crash) and for more options regarding the placement of the clutch lever and the hand brake lever in relation to one another. A mechanical clutch lever is much easer to fit underneath another mechanical clutch than an entire master cylinder is. It is also much less expensive to replace than a Brembo master cylinder should your bike come down (even at slow speed) on the left hand side.
What makes it variable ratio?
The mechanical lever is linked to the master cylinder with a top quality clutch cable. There are 4 points at which the cable can enter the master cylinder, which correspond to four points at which the cable end is retained. The first setting is slightly less powerful than a Brembo 16 x18 brake master for people that want a firmer feel at the lever. The next 3 positions are each incrementally more powerful. Most will run the brake with the cable in the 2nd or 3rd position as you have a light enough lever pull to be highly effective but still have enough feedback and lever pressure to tell what you are doing. The fourth position is too much of a mechanical advantage to be practical for most applications, but I'd rather give people the option for excess than have them think they are missing out on some additonal potential!
CHECK THE LINK FOR MORE ANSWERS FROM BILL
So what is it? Well it's the product of everything we've learned making hydraulic components and at the same time the answer to various complaints people have voiced over the four years we've been in the stunt industry. The high points are below, more information follows and the pictures are at the bottom. Give us a call toll free at 877-785-7282 and let us help you step up your game in 2008!
This hand brake is:
Variable Ratio
One model fits all sport bikes
No modification to the rear master cylinder is nescessary
No reservoir on the bar! (the stock res. on the rear master supplies the entire system)
Single caliper, no additional rear caliper is needed
Full use of the foot brake is retained
The hand brake can be used while still applying pressure to the foot brake
the handbrake lever and the clutch lever can be mounted extremely close together
every pivot point is on bearings
Controllable Herculean power at your fingertip!
It is mounted on the fork to remove it from the vulnerable position on the handlebar (in the event of a crash) and for more options regarding the placement of the clutch lever and the hand brake lever in relation to one another. A mechanical clutch lever is much easer to fit underneath another mechanical clutch than an entire master cylinder is. It is also much less expensive to replace than a Brembo master cylinder should your bike come down (even at slow speed) on the left hand side.
What makes it variable ratio?
The mechanical lever is linked to the master cylinder with a top quality clutch cable. There are 4 points at which the cable can enter the master cylinder, which correspond to four points at which the cable end is retained. The first setting is slightly less powerful than a Brembo 16 x18 brake master for people that want a firmer feel at the lever. The next 3 positions are each incrementally more powerful. Most will run the brake with the cable in the 2nd or 3rd position as you have a light enough lever pull to be highly effective but still have enough feedback and lever pressure to tell what you are doing. The fourth position is too much of a mechanical advantage to be practical for most applications, but I'd rather give people the option for excess than have them think they are missing out on some additonal potential!
CHECK THE LINK FOR MORE ANSWERS FROM BILL
Last edited by -Nasty-; 01-08-2008 at 09:26 PM.
01-08-2008, 09:34 PM
#4
Registered User
Join Date: Feb 2005
Location: mechanicsburg PA
Age: 43
Posts: 1,156
Re: Full Throttle Bill Does It Again! New Hand Brake Era.
i just saw that on BMoreX.com, looks dope...if i didnt already have a 16x18 id buy one...guess my next bike will get one. i bet lever placement is butter:YEAH good job bill
01-08-2008, 10:02 PM
#7
www.cycletreads.co.nz
Join Date: Dec 2005
Location: Auckland, New Zealand
Age: 33
Posts: 1,424
Re: Full Throttle Bill Does It Again! New Hand Brake Era.
Last edited by Kevmo7; 01-08-2008 at 10:04 PM.
01-08-2008, 10:20 PM
#13
Registered User
Join Date: Dec 2005
Location: northeast
Posts: 560
Re: Full Throttle Bill Does It Again! New Hand Brake Era.
its cheap! compared to a 16x18 setup! with an adapter a 16x18 is like $330, and with double caliper a 16x18 is like $495.
i second ryans! Bill for President!
i second ryans! Bill for President!
01-08-2008, 10:26 PM
#14
Registered User
Join Date: Apr 2004
Location: Melbourne, AUS
Age: 43
Posts: 550
Re: Full Throttle Bill Does It Again! New Hand Brake Era.
brilliant! the brake line routing will look interesting with two lines running from this master cylinder to the back... but i love it!
and it should pretty much be the last handbrake you buy since it doesn't have to suit any bike in particular.
with the 4 adjustment points on the master, coupled with an ezpull lever with 3 adjustment points, you should be able to set it up in heaps of ways and experiment without having to find another master with different bore dimension.
and it should pretty much be the last handbrake you buy since it doesn't have to suit any bike in particular.
with the 4 adjustment points on the master, coupled with an ezpull lever with 3 adjustment points, you should be able to set it up in heaps of ways and experiment without having to find another master with different bore dimension.
01-08-2008, 11:14 PM
#17
Registered User
Join Date: Apr 2007
Location: Billings Heights, MT, USA
Posts: 563
Re: Full Throttle Bill Does It Again! New Hand Brake Era.
Wow wow wow....love it. That is why I love this site, more damn innovation and talent than any other bike forum period. Damn, I need my tax check like yesterday!!!!
01-08-2008, 11:27 PM
#20
Registered User
Join Date: Nov 2003
Location: BFE, MD
Age: 54
Posts: 3,996
